Fiksna brodska VHF s EVO verzijom i integriranim AIS-om

The IC-M510EAIS EVO VHF stands out with several advanced features:

Integrated AIS receiver: Displays nearby maritime traffic information directly on the screen for enhanced safety.Wi-Fi control: Thanks to the built-in WLAN module and the RS-M500 app (for iOS and Android), you can control the radio and view AIS targets from a smartphone.NMEA 2000 connectivity: Enables easy sharing of AIS and positioning data with other navigation equipment such as chartplotters.GNSS/SBAS receiver: Includes GPS for precise positioning.High robustness: IP68-rated waterproofing and MIL-STD-810G certified resistance.

Yes, this VHF is designed for the most demanding marine conditions. It holds an IP68 certification, ensuring high protection against water immersion. Additionally, it meets the MIL-STD-810G military standard, attesting to its robustness against shocks and vibrations.

Yes, the IC-M510EAIS EVO VHF is equipped with a NMEA 2000 interface. This allows it to integrate seamlessly into your existing navigation network and share data, such as AIS targets and GPS position, with compatible chartplotters from brands like Garmin, B&G, or Raymarine.

This VHF integrates Wi-Fi connectivity. By downloading the free RS-M500 app on your smartphone (iOS or Android), you can turn it into a remote station. This allows you to make calls, manage the radio functions, and monitor AIS traffic without being physically in front of the device.

Yes, this model is equipped with an integrated GNSS/SBAS (GPS) receiver. It is therefore not necessary to connect it to an external GPS antenna to obtain positioning data, which are essential for ASN (Digital Selective Calling) and AIS functions.

The IC-M510EAIS EVO VHF has switchable transmission power. You can choose between two levels:

High power: 25 WLow power: 1 W

The IC-M510EAIS EVO VHF offers full connectivity with multiple standards:

NMEA 2000 for integration with modern navigation systems.NMEA 0183 for compatibility with older equipment.Wi-Fi (IEEE802.11 b/g/n) for remote control via the mobile application.

The device must be powered by a 12.0 V DC (direct current) source with negative ground. The accepted operating voltage range is 10.8 V to 15.6 V DC.

The dimensions of the main unit (excluding protrusions) are 175 mm (Width) × 110 mm (Height) × 53 mm (Depth). Its approximate weight without the microphone is 750 g.

Yes, it is perfectly possible to connect an external speaker. The VHF can deliver an audio output power of up to 15 W on an external 4 Ω speaker, ensuring clear listening even in a noisy environment.

The IC-M510EAIS EVO VHF is designed to operate within a wide temperature range from -20°C to +60°C, making it reliable in most marine weather conditions.

For a safe installation, it is recommended to use a 10 Ampere fuse with a nominal voltage of 250 Volts. The fuse coding reference mentioned in the documentation is F 250 V 10 A.

Class D ASN (Digital Selective Calling) is a standard that allows distress calls to be sent with a single button press. These calls include the vessel's identity (MMSI) and GPS position, automatically alerting rescue services and nearby vessels. This VHF complies with this essential safety standard at sea.

No, this VHF is specifically designed for a 12V DC electrical system. To install it on a 24V-equipped boat, you will need to use a 24V to 12V voltage converter suitable for the device's power consumption (up to 5.6 A when transmitting).

You must use a standard marine VHF antenna designed for the marine frequency band (approximately 156–162 MHz). The antenna must have a nominal impedance of 50 Ω (ohms) to ensure optimal transmission and reception performance.

The IC-M510EAIS EVO VHF is equipped with an AIS receiver. It allows you to receive and display information from nearby vessels that transmit an AIS signal, but it does not transmit your own boat's position. It is an active safety tool for collision prevention.

The integrated AIS receiver operates on both standard AIS channels:

AIS Channel 1: 161.975 MHzAIS Channel 2: 162.025 MHz

The documentation states that the MMSI number (Maritime Mobile Service Identity) is a 9-digit code that can generally only be entered once, during the initial commissioning of the device. It is critical to enter it correctly, as any subsequent modification requires the intervention of an authorized technician.

To secure the connection between the VHF radio and your smartphone, the device supports multiple authentication and encryption protocols:

WEP (64/128 bits)WPA-PSK (TKIP)WPA2-PSK (AES)

The device's power consumption, at a voltage of 13.8 V DC, is as follows:

On high-power transmission (25 W): 5.0 A maximum.On reception with maximum audio volume: 1.6 A.