Sondeur EAGLE 7 TripleShot

The TripleShot transducer supplied with the Lowrance EAGLE 7 combines three detection technologies:

High-frequency CHIRP sonar: For superior target separation and clear fish identification.SideScan Imaging™: Provides detailed images of structures and the seabed to the sides of your boat.DownScan Imaging™: Delivers near-photographic images of what lies directly beneath your boat.

The EAGLE 7 fishfinder features a 7-inch screen with a resolution of 800 x 480 pixels, providing a clear and detailed image.

Yes, the EAGLE 7 fishfinder housing has an IPX7 waterproof rating. This means it is protected against temporary immersion in water.

The device has a card reader compatible with microSD cards up to 32 GB capacity.

The EAGLE 7 TripleShot fishfinder must be powered by a 12 V DC source. The accepted operating voltage range is 10.8 V to 18 V DC.

To protect the device, it is recommended to use a 3 A fuse when installing the power supply.

Yes, the Eagle 7's single transducer port is compatible with Lowrance TripleShot™ and SplitShot™ transducers.

The maximum power consumption of the EAGLE 7 is 6.6 W, which corresponds to approximately 550 mA at a voltage of 12 V DC.

The device is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F).

To take a screenshot, you must simultaneously press the Pages button and the Power button.

Yes, to create an MOB (Man Overboard) waypoint instantly, simply press the Zoom in (+) and Zoom out (-) buttons simultaneously.

To clean the housing, use warm water with a small amount of dish soap or mild detergent. It is important not to use a high-pressure water jet for cleaning.

The weight of the EAGLE 7 fishfinder screen, without its bracket or cables, is 0.67 kg (1.48 lb).

Yes, the EAGLE 7's screen offers excellent viewing angles of 85° in all directions (up, down, left, and right), ensuring good readability even from the sides.

The EAGLE 7 has a single depth sounder port. You can therefore connect only one depth sounder at a time (TripleShot™ or SplitShot™ model).

The SideScan and DownScan Imaging™ technologies of the TripleShot transducer operate at frequencies of 455 kHz and 800 kHz to deliver high-resolution images.

No, the EAGLE 7 is designed exclusively for 12 V DC power supply. Connecting it to a 24V circuit will permanently damage the device.

The EAGLE 7 fishfinder has a single slot for a microSD memory card.

These two technologies provide detailed images, but from different perspectives:

DownScan Imaging™ scans the water column and the seabed directly beneath your boat. SideScan Imaging™ scans large areas on the left and right sides of your boat, ideal for quickly locating structures.

The CHIRP high-frequency fishfinder from the TripleShot transducer is specialized in detecting and separating fish. It makes it easier to distinguish target fish from other elements (structures, seabed) and even differentiate fish within a school.