Sondeur ELITE FS 9 s aktivnom sondom Active Imaging HD 3-u-1

The Lowrance ELITE FS 9 fishfinder features a 9-inch multi-touch color display. It provides a high-definition resolution of 800 x 480 pixels and a brightness exceeding 1200 nits, ensuring excellent visibility even in bright sunlight.

Yes, the Lowrance ELITE FS 9 fishfinder is designed for demanding marine environments. It has an IPx6 and IPx7 protection rating, ensuring resistance to powerful water jets and temporary immersion.

FishReveal technology combines CHIRP sonar and DownScan data on the same screen. This makes it easier and clearer to identify fish targets by overlaying CHIRP fish arches onto the detailed DownScan images.

The ELITE FS 9 fishfinder can operate within a temperature range of -15°C to 55°C (5°F to 131°F). For storage, the range is -20°C to 60°C (4°F to 140°F).

To quickly save a waypoint, you can press the Waypoint button twice. A single press displays the 'New Waypoint' dialog for customization.

Yes, to take a screenshot, simply press the 'Pages' button and the 'Power' button on the device simultaneously.

To clean the fishfinder housing, use warm water with a small amount of dish soap or mild detergent. Do not use a jet or pressure washer to avoid damaging the unit.

The ELITE FS 9 fishfinder supports multiple sonar frequencies, depending on the configured transducer model. Available frequencies include 455 kHz, 800 kHz, 50 kHz, 200 kHz, as well as CHIRP frequencies of 700 kHz, 1075 kHz, and 1200 kHz.

Yes, the ELITE FS 9 fishfinder includes a GPS receiver with a 10Hz refresh rate, compatible with WAAS, MSAS, EGNOS, and GLONASS systems for precise positioning.

The device allows you to create and manage waypoints, routes, and tracks. You can start navigation of a route directly from the chart window and use the +/- buttons to zoom in/out or adjust the scale.

Yes, the ELITE FS 9 fishfinder has a microSD card reader that can be used to store chartplotter data. It supports cards up to 32 GB.

Yes, the ELITE FS 9 fishfinder is compatible with ActiveTarget and ActiveTarget 2 real-time fishfinders. These modules are sold separately and enable dynamic observation of fish and underwater structures.

The ELITE FS 9 fishfinder offers several network connectivity options:

One NMEA 2000 port (Micro-C connector). One Ethernet port (5-pin connector, 100Base-T). Wi-Fi connectivity (802.11b/g/n, in access point and client modes). Bluetooth 4.0 connectivity with Bluetooth® Classic support.

Yes, to access the detailed views of Active Imaging HD with advanced CHIRP frequencies (700 kHz and 1200 kHz for DownScan, 455 kHz and 1075 kHz for SideScan), an additional S3100 module is required. Without this module, the standard Active Imaging transducer uses frequencies of 455 kHz and 800 kHz.

Yes, the ELITE FS 9 fishfinder supports integration with autopilot systems, including bow thruster electric autopilots (such as Recon) and outboard autopilots. It is important to follow usage precautions when operating an autopilot.

Yes, you can download the 'Lowrance Fish and Navigation' app from the Apple® App Store® and the Google Play® Store. Once connected, the app allows you to register your display unit and synchronize your data.

The ELITE FS 9 fishfinder is designed to be powered by a 12 V DC supply. The supported minimum and maximum voltage range is 10.8 V DC to 17 V DC.

A 3 A fuse or circuit breaker must be installed on the positive power supply line to ensure adequate protection.

The maximum power consumption of the ELITE FS 9 fishfinder (9-inch model) is 28 W, which corresponds to a current draw of 2 A at 13.8 V DC.

The Lowrance ELITE FS 9 fishfinder comes with the Active Imaging HD 3-in-1 transducer and supports several advanced technologies for fish detection and underwater imaging:

Imaging technologies: It supports Lowrance CHIRP, SideScan, and DownScan Imaging.Frequencies with Active Imaging HD (with additional S3100 module): To access the detailed Active Imaging HD views, the S3100 module must be purchased separately. With this module, the supported frequencies are:DownScan: CHIRP at 700 kHz and 1200 kHzSideScan: 455 kHz and 1075 kHzFrequencies with standard Active Imaging (without S3100 module): If the S3100 module is not used, the Active Imaging transducer operates in standard mode with frequencies of 455 kHz and 800 kHz.FishReveal: This technology combines CHIRP and DownScan data on the same screen to simplify target identification.Compatibility: The unit is also compatible with the ActiveTarget and ActiveTarget 2 real-time fishfinders (sold separately).