Sonda Eagle TripleShot

The Lowrance Eagle TripleShot transducer is an advanced transducer designed to enhance the detection capabilities of Lowrance Eagle multifunction displays. It integrates multiple sonar technologies to provide a detailed and comprehensive underwater view.

The TripleShot transducer integrates three distinct sonar technologies:

CHIRP wide-angle high-frequency for optimized fish detection and improved target separation.
SideScan for high-resolution side-view imaging of structures and fish on either side of the boat.
DownScan Imaging for near-photographic images of structures beneath the boat.

The Lowrance Eagle TripleShot transducer is compatible with Lowrance Eagle series displays, including the Eagle 5, Eagle 7, and Eagle 9 models. It connects via a single port on these units.

The SideScan technology of the Lowrance Eagle TripleShot depth sounder uses 455 kHz and 800 kHz frequencies to deliver high-resolution side imaging.

The TripleShot transducer provides a more extensive and detailed coverage compared to other transducers in the Eagle range. It outperforms the Bullet Skimmer transducers (which only offer 2D sonar) and the SplitShot transducers (which combine CHIRP and DownScan, but without SideScan).

The Lowrance Eagle TripleShot transducer is typically designed for transom mounting. This mounting type allows for easy installation and optimal performance for SideScan and DownScan Imaging technologies.

No, the Lowrance Eagle TripleShot transducer is not compatible with Lowrance Eagle Eye 9 displays. The Eagle Eye 9 displays have a dedicated sounder port compatible only with Eagle Eye™ transducers.

CHIRP wide-angle high frequency provides optimized fish detection and better target separation in the water column. It offers a broader coverage, which is useful for spotting fish schools and underwater structures over an extended area.

DownScan Imaging is a technology that provides near-photographic images of structures beneath the boat. It makes it easier to identify fish hides, bottom features, and wrecks, offering exceptional clarity to distinguish fish from structures.

SideScan provides a high-resolution side view of structures and fish located alongside the boat. It allows for rapid scanning of large areas, making it ideal for locating submerged structures, underwater cliffs, or fish schools that are not directly beneath the vessel.

Yes, the Lowrance Eagle TripleShot transducer is supplied with the integrated transducer cable, designed to connect directly to the single transducer port of compatible Lowrance Eagle series displays (Eagle 5, Eagle 7, Eagle 9).

Yes, the Lowrance Eagle TripleShot transducer is designed to perform in a variety of aquatic environments, including freshwater and saltwater. Its CHIRP, SideScan, and DownScan Imaging technologies are effective in both types of environments.

No, the Lowrance Eagle TripleShot transducer is powered directly by the Lowrance Eagle multifunction display to which it is connected. The entire system’s power is managed by the display.

For optimal performance of SideScan and DownScan Imaging, it is recommended to mount the TripleShot transducer on the transom, in a location with an unobstructed view of the water, free from interference by the propellers, engine, or other boat structures. A position slightly below the hull is often ideal to avoid turbulence.

The transducer itself does not store data, but it transmits sonar information to a compatible Lowrance Eagle display. Lowrance Eagle displays can record sonar data to a microSD card (up to 32 GB maximum) inserted in their card reader, allowing you to review and analyze recordings later.

For installing the TripleShot transducer, you will typically need basic tools for transom mounting, such as a drill, drill bits suitable for your boat's materials (wood, fiberglass, aluminum), a screwdriver, a marker, and possibly a marine sealant. It is always recommended to consult the installation manual provided with the transducer for a complete list and detailed instructions.