Tiny tri 1MN - trobojna svjetiljka + sidrena svjetlost

The Mantagua Tiny tri 00094 is a combined navigation light, featuring a tricolour navigation light and a anchor light.

This light has a luminous range of:

1 nautical mile (NM) for the tricolor function. 2 nautical miles (NM) for the anchor light function.

The Mantagua Tiny tri 00094 light is specifically designed and suitable for vessels under 12 metres (39 feet).

The power consumption of this combined light is 1.8 Watts.

The Mantagua Tiny tri 00094 light requires a 12 V DC power supply.

The light dimensions are H 30 + 42 mm with a diameter of Ø 40 mm. Its weight is 70 + 15 grams.

Yes, the Mantagua Tiny Tri 00094 light is designed to be highly robust. It is IP67 waterproof and vibration-resistant thanks to its fully epoxy-resin encapsulated design.

The Mantagua Tiny tri 00094 light can operate within a temperature range from -20°C to 50°C.

The Mantagua Tiny tri 00094 light is supplied with a 15-metre cable.

The luminous intensity of this light is greater than 1.1 Candela.

The light can be mounted in several ways:

With the supplied mounting bracket: The bracket is delivered folded at 45°. You can bend it to 90° for mounting on top of the mast (option 1) or flatten it in a vice for mounting on the side of the mast (option 2).Directly at the masthead: It is also possible to glue the light directly at the masthead without using the bracket, ensuring it is oriented toward the bow of the boat.The cable must be passed through the light’s base, and the base is then secured to the light with the 2 supplied screws.

The light is supplied with a stainless steel mounting bracket and stainless steel screws (ø 4 mm) for installation.

It is crucial to orient the light correctly by ensuring the boat symbol on the top of the light points toward the bow of the boat.

For the anchor light, the connections are as follows:

The white wire is for the negative (-). The brown wire is for the positive (+) 12V DC.

For the tricolour navigation light, the connections are as follows:

The yellow wire is for the negative (-). The green wire is for the positive (+) 12V DC.

A power cable with a minimum cross-section of 0.5 mm² is recommended for 12V DC connections.

Yes, if you wish, you can avoid using the stainless steel mounting bracket and glue the light directly to the masthead, provided you strictly respect the forward-facing orientation of the boat.

No, this light is specifically designed for 12 V DC power supply and is not compatible with 24V systems.

No, the Mantagua Tiny Tri 00094 light is certified and suitable for vessels under 12 meters. For larger boats, other navigation lights with different ranges and certifications are required.

The mounting system with the adjustable bracket (L-bend or U-bend) provides good adaptability. However, installation will depend on your masthead’s specific configuration. The mounting options (bracket bending or direct adhesive) allow for some flexibility.