Pretvarač punjač Mass Combi Ultra 24/3500-100 230 V

This is a complete energy management unit designed by Mastervolt. It combines a 3500 W pure sine wave inverter, a 100 A main battery charger for 24V systems, and an integrated solar charge MPPT regulator.

The inverter delivers a continuous power output of 3500 W, even at an ambient temperature of 40 °C. It also has a peak capacity of 7000 W, ideal for starting heavy inductive loads.

Yes, thanks to its 3-stage+ intelligent charging algorithm, this device is fully compatible with lithium-ion batteries, as well as lead-acid, Gel, and AGM batteries.

Yes, the Ultra range includes a dedicated DC solar input paired with an MPPT controller. It accepts a voltage range of 30 to 100 V and can handle up to 750 Wp (Watt-peak) of photovoltaic panels.

The Power Assist function automatically compensates for AC power drops (such as from a low-amperage shore power outlet) by drawing the missing energy from your batteries. This prevents the shore power fuses from tripping.

It has two independent AC inputs (for shore power and a generator) and two AC outputs. The main output (Out-1) provides uninterrupted power, while the secondary output (Out-2) is disabled when no external source is available to protect the batteries.

Yes, the device features a secondary 10 A charging output. This output is configurable for 12 V or 24 V and is specifically designed for maintaining a starter battery or a small secondary battery bank.

No, the Mass Combi Ultra has an IP23 protection rating. It is designed for indoor use only and must be installed in a dry location, protected from direct water spray.

The device measures 472 mm in height, 318 mm in width, and 178 mm in depth. Its total weight is 15.3 kg.

Yes, it is possible to install up to 10 units in parallel or in a three-phase configuration to increase available power. This requires connecting the devices via MasterBus and Sync cables and configuring them using the MasterAdjust software.

For this 24V model, use DC cables with a minimum cross-section of 50 mm² and install an inline 175 A fuse as close as possible to the battery bank to ensure system safety and efficiency.

Yes, the built-in inverter delivers a 230V pure sine wave output. This ensures optimal operation and no risk of damage to sensitive electrical devices such as computers or televisions.

No, it incorporates the Active Optima Cooling concept which intelligently regulates the speed of the integrated fan. This significantly reduces ventilation noise, making it discreet on board.

The main AC output (Out-1) instantly switches to battery power via its UPS function (uninterruptible power supply). Your critical devices will continue operating without any noticeable interruption.

Yes, the output frequency is configurable for 50 Hz or 60 Hz. This setting can be adjusted easily via the DIP switches integrated into the device or via the MasterBus network.

It operates optimally between -25 °C and 60 °C. Automatic power reduction (derating) is applied when ambient temperature exceeds 40 °C to protect internal components.

Yes, a temperature sensor is supplied with the device. It is strongly recommended to connect it to allow the charger to automatically adjust the charging voltage based on the actual temperature of your battery bank.

Yes, the Mass Combi Ultra is fully compatible with the MasterBus communication network. You can connect it to Mastervolt displays or to a compatible marine monitoring system for complete control and configuration.

The accepted AC input voltage range is very wide, from 184 to 275 V. This flexibility allows the device to adapt easily to unstable dock networks or voltage variations from generators.

Yes, to ensure a secure installation compliant with marine electrical standards (such as ABYC), residual current devices (RCDs) must be integrated on the AC inputs and AC outputs of the device.