Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Uštedite 14%

Mastervolt

77030500

Izlazni višefunkcijski kontakt

The Mastervolt Multipurpose Contact Output is a programmable DC relay for the MasterBus network. It allows control of a 12/24 V device up to 1 A (fan, alarm, generator contactor) based on configured events. The package includes the module, screw terminal block, MasterBus cable, MasterBus terminator, and user manual.

Public priceGet pro pricing

184,50€

184,50€ ~~216,00€~~

UK Isporuke izračunate u trenutku plaćanja.

Na zalihi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Technical specifications

Nazivni napon	30 V
Jakost struje (A)	1.0
Broj strujnih krugova	1.0
Broj polova	1 pôle
Podržani baterijski sustavi	0.0
Tip prekidača baterije	Non applicable
Metoda kontrole prekidača baterije	Non applicable
Vrsta resetiranja osigurača	Non applicable
Tip osigurača	Non applicable
Nazivna struja kontinuiranog rada DVSR-a	0.0
Vrsta montaže	Rail DIN
IP zaštitni stupanj	IP21
Tip zaslona	Non applicable
Žičana mreža	MasterBus
Certifikati	CE
Dimenzije (Š x V x D)	66 x 78 x 32
Težina	0.08
Konfiguracija kontakata	NO-C-NC
Veličina kompatibilne DIN šine	30
Prikaz jezika	Anglais, Néerlandais, Allemand, Français, Espagnol, Italien, Danois, Suédois, Finnois, Norvégien
LED indikator statusa	Oui
Uputstvo uključeno	Oui
MasterBus kabel uključen	Oui
Vrsta MasterBus konektora	Connecteur propriétaire MasterBus
MasterBus napajanje	Non
MasterBus potrošnja energije mW	132
MasterBus terminator uključen	Oui
Dubina proizvoda	32
Visina proizvoda	78
Vrsta proizvoda	Sortie contact multifonctions
Neto težina proizvoda	80
Upakirana težina proizvoda	0.3
Širina proizvoda	66
Maksimalni napon releja	30
Uključeni priključni vijak	Oui
Raspon temperature skladištenja	-30 à 70
Jamstvo	2

Detailed description

Mastervoltov višefunkcijski izlazni kontakt upravlja se magistralom podataka MasterBus. Omogućuje daljinsko upravljanje uređajima 12/24 V do 1 A, poput ventilatora, zvučnog alarma ili agregata, ovisno o događajima koji se mogu konfigurirati na mreži. Ovaj modul je jednostavno i pouzdano rješenje za dodavanje funkcija automatiziranog upravljanja vašoj brodskoj električnoj instalaciji.

Programibilni relej za automatizaciju na brodu

Za razliku od standardnog releja, ovaj modul se integrira u mrežu MasterBus i njime se može upravljati iz bilo kojeg kompatibilnog uređaja (punjač Mass, MasterShunt, DC Distribution). Omogućuje stvaranje scenarija automatizacije: pokretanje ventilatora baterijskog odjeljka kada punjač prijavi kvar, aktiviranje zvučnog alarma u slučaju niskog napona baterije ili upravljanje kontaktom agregata. Višefunkcijski izlazni kontakt nudi funkcije vremenskog odgode (minimalno/maksimalno vrijeme rada) i puls pokretanja od jedne sekunde, što je ključno za neke agregate. Razlikuje se od složenijih ulazno/izlaznih modula (poput MasterBus Analog Interface) po jednostavnosti i nižoj cijeni, budući da je namijenjen samo jednoj funkciji prekapčanja.

Jednostavna instalacija i integracija

Modul se montira na DIN šinu 30 mm i spaja na mrežu MasterBus putem priloženog kabela i konektora. Malih je dimenzija (66 x 78 x 32 mm) i niske potrošnje (132 mW), što ga čini neupadljivim i ekonomičnim. Instalacija se svodi na spajanje podatkovne magistrale i priključak kontrole na vijčanu stezaljku (suhi kontakt NO/NC/COM, 1 A / 30 V DC). Konfiguracija događaja obavlja se putem MasterBus zaslona ili softvera MasterAdjust. Isporuka uključuje vijčanu stezaljku, MasterBus kabel, MasterBus terminator i korisničko uputstvo.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Sortie Contact Multifonctions
	FR - Manuel d'utilisation - Sortie Contact Multifonctions
	EN - Manuel d'utilisation et d'installation - Sortie Contact Multifonctions

Expert review

Pol CONIN

Digitalni odgovorni

« A clever small relay for the MasterBus network »

The Multipurpose Contact Output is a small module that is very practical for adding a controlled switching function to a MasterBus network. It is not a groundbreaking product, but a reliable and proven basic component. Its main advantage is its simplicity: it replaces a conventional relay with programmable control logic. It is ideal for simple tasks such as managing a battery compartment fan, activating an alarm, or controlling a small contactor. Note that its dry contact is limited to 1 A and is not designed to switch high power directly. For this purpose, it should be used to drive a more powerful contactor. It is an excellent complement to Mass chargers and MasterShunt battery monitors for creating basic automation without breaking the bank.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Izlazni višefunkcijski kontakt

184,50€

184,50€ ~~216,00€~~

Frequently Asked Questions

Need help? Contact us

How to install the Multipurpose Contact Output on my MasterBus network?

Installing the Multipurpose Contact Output is straightforward. It mounts on a 30 mm DIN rail. Connect the MasterBus cables to the dedicated connector, then wire your equipment (fan, alarm, etc.) to the screw terminal, following the labels: input (1), normally closed output (2), and normally open output (3). The relay’s maximum current is 1 A.

Is this module compatible with all Mastervolt chargers?

Yes, the Multipurpose Contact Output is compatible with Mastervolt chargers equipped with the MasterBus data bus, such as the ChargeMaster or the Mass Charger. It can be configured as a charger status interface (CSI) to trigger an action in case of a fault.

What is the maximum voltage the relay contact can handle?

The potential-free contact of the Multipurpose Contact Output can handle a maximum voltage of 30 V DC and a maximum current of 1 A. It is designed for 12 V or 24 V applications.

Can I use this module to control a generator?

Yes, this is a typical use case. The Multipurpose Contact Output can be configured to start and stop a generator. It includes a 1-second start pulse option required by some generators, as well as minimum and maximum runtime delays.

Which types of equipment can I order with this contact output?

You can order any 12/24 V equipment drawing less than 1 A, such as a battery compartment fan, a buzzer, an alarm, a generator contactor, or a power supply. The relay is a dry contact (NO/NC/COM).

How to configure the minimum runtime of the relay?

Configuration is done via the MasterBus menu. You can enable the 'Min. runtime' option and set the duration between 15 minutes and 45 days. The factory setting is 15 minutes.

Is this module compatible with the MasterShunt?

Yes, the Multipurpose Contact Output is compatible with the MasterShunt. You can, for example, configure an event so that the relay activates when the battery level is low, to start a generator.

What is the IP protection rating of this product?

The Multipurpose Contact Output has an IP21 protection rating, meaning it is protected against access to hazardous parts with a finger and against vertically falling water droplets. It is suitable for installation inside the boat, in a dry location.

Can I change the device name in the MasterBus network?

Yes, you can customize the device name. By default, it is called 'DC Relay', but you can rename it with up to 12 characters via the configuration menu.

What does the LED indicator on the module mean?

The communication LED lights up when the relay state is 'activated' (Activate). It allows you to visually verify if the relay is operating.

Can the Multipurpose Contact Output be used with a 24 V system?

Yes, the module is designed for 12 V and 24 V systems. The relay contact supports up to 30 V DC, making it perfectly suited for 24 V installations.

How to reset the Multipurpose Contact Output to factory settings?

Factory reset is generally performed via the MasterBus configuration software. Refer to the user manual for the exact procedure, as it may vary depending on the firmware version.

Can I use this module as an interface for a battery level alarm?

Yes, this is a common application. By configuring an event on a MasterShunt or another battery monitor, you can make the Multipurpose Contact Output trigger a visual or audible alarm when the battery voltage reaches a critical threshold.

Is the product supplied with the MasterBus cable and connector?

Yes, the delivery includes a MasterBus cable, a MasterBus connector, a screw terminal block, and the user manual. All the necessary components for a basic installation are provided.

How to configure a one-second start pulse for a generator set?

In the Multipurpose Contact Output configuration menu, enable the 'Puls. (1sec)' (1 sec pulse) option. This will generate a one-second pulse when the relay is activated, which is required for certain generator starters.

Can I use this module to control a battery compartment fan?

Yes, this is a typical use. You can set up an event on the Mass charger so the relay activates a fan when the charger is running or in fault, to vent gases.