Ethernet kabel 7,6 m

This cable is used to create a high-speed network to connect marine electronic navigation equipment. It enables the sharing of large data volumes such as charts, fishfinder images, radar targets, and routes between multiple multifunction displays (MFD) and compatible modules.

This cable is designed to work with equipment from Navico group brands, which includes:

B&G, Lowrance, Simrad

The main difference lies in the connector and robustness. This cable uses a 5-pin yellow waterproof and screw-type connector, designed to withstand the marine environment (vibrations, humidity, salt). A standard Ethernet cable uses a non-waterproof and less robust RJ45 connector.

Yes, you can use this cable to directly link two compatible multifunction displays (e.g., a Simrad and a Lowrance) so they share data. No additional parts are required for a connection between two devices.

Yes, this is one of its primary uses. This cable provides the high-speed connection required between a radar antenna (radome or masthead) and a compatible multifunction display to show the radar image.

The yellow color is a color code used by Navico to easily identify Ethernet cables and ports. This prevents confusion with other types of onboard connections, such as the NMEA 2000 network (black and red connectors).

The difference lies in speed and the type of data. The Ethernet network (this cable) is designed for transferring very large amounts of data (chartplotting, radar, fishfinder). The NMEA 2000 network is designed for lighter data (GPS position, speed, engine data, wind). Both networks are often complementary on a boat.

To connect three or more devices (for example, two displays and a fishfinder module), you must use a network switch, such as the Navico NEP-2. Each device will then be connected to this switch via an Ethernet cable like this one.

Yes, absolutely. This cable is required to connect an external fishfinder module (such as a StructureScan 3D, S5100, etc.) to your compatible multifunction display in order to view fishfinder images.

No, it is strongly advised against cutting or repairing this cable. Any modification would compromise its shielding and waterproofing, which could lead to data loss and malfunctions on your network. It is better to coil the excess cable in a dry location.

Yes, you can connect two Navico Ethernet cables together to achieve a longer length. You will need an Ethernet extension coupler (sold separately) to join the two connectors in a watertight manner.

This cable enables sharing of data requiring high bandwidth, including:

Chartplotter mapping (single chart across multiple displays)Sonar images (CHIRP, DownScan, SideScan, StructureScan)Radar data and imagesWaypoints and routes

No, not directly. Older Lowrance devices used a blue connector. To connect a device with a yellow port (like this one) to a device with a blue port, you must use a specific adapter cable (Navico part number 000-0127-50).

No, no specific tools are required. The connector screws in by hand to ensure a secure and watertight connection. You will, however, need basic tools to route the cable through your boat's bulkheads.

No, the cable itself is passive and does not require power. It only serves to carry data. However, each device you connect with this cable (display, radar, etc.) must have its own power supply.

Yes, this is one of the major advantages of the Navico ecosystem. You can use this cable to connect and enable communication between compatible devices from all three brands (B&G, Lowrance, Simrad) on the same Ethernet network.