IP kamera, SS, PoE+12V, IP CAM-1

The IP CAM-1 IP camera provides two streaming resolutions:

Main stream: 1080p (1920 x 1080 pixels) for high-definition imagery.Secondary stream: 448p (800 x 448 pixels) for applications requiring lower bandwidth.

You have two options to power the camera:

Power over Ethernet (PoE): Using a single Ethernet cable for power and data, compliant with IEEE 802.3af standard.DC 12V power: Via a standard CCTV male power connector (2.1 x 5.5 mm), compatible with a voltage range of 10 to 16V DC.

The IP CAM-1 camera is designed for native and reliable integration with multifunction displays from Navico group brands, including Simrad, B&G, and Lowrance. Compatibility is ensured via the standard RTSP streaming protocol.

Yes, absolutely. The camera housing is fully constructed from 316 stainless steel, a material renowned for its high resistance to corrosion, including in saline marine environments. Additionally, it is IP66 certified, ensuring full protection against dust and powerful water jets.

The IP CAM-1 camera is designed for extreme conditions. Its operating temperature range is from -30°C to +60°C (-22°F to 140°F), allowing installation both outdoors and indoors in hot areas such as an engine room.

The camera ships with a fixed IP address to ensure a stable connection. You will find this unique IP address printed on an identification label attached directly to the camera's cable.

Yes, the camera is equipped with infrared (IR) LEDs for night vision. Power consumption increases from 1.38 W when the LEDs are off to 2.76 W when they are on, confirming this feature.

The camera uses the RTSP (Real Time Streaming Protocol) standard. This protocol ensures broad compatibility with many display systems, particularly Navico multifunction displays (Simrad, B&G, Lowrance).

Yes, this is one of the advantages of this camera. Thanks to its Power over Ethernet (PoE, IEEE 802.3af standard) compatibility, a single network cable is sufficient to transmit both power and video data, greatly simplifying installation.

The IP camera CAM-1 power consumption varies depending on night vision usage:

IR LEDs off (day): 1.38 W (0.1 A at 13.8 V DC)

IR LEDs on (night): 2.76 W (0.2 A at 13.8 V DC)

The IP CAM-1 camera is very lightweight and compact, weighing only 250 grams (0.55 lbs).

For direct power supply, the camera accepts a voltage range from 10 V DC to 16 V DC, making it fully compatible with standard 12V boat electrical systems.

The camera is supplied with a fixed IP address. This ensures a more stable and reliable connection with your multifunction display, as the address will not change each time the system restarts.

The IP CAM-1 camera is equipped with a 1/4-inch CMOS sensor, which enables clear image capture in 1080p high definition.

The camera connects to your navigation system via a standard Ethernet network cable. It plugs into an Ethernet port on your multifunction display or into a network switch on your boat.