Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.

EV-100 Tiller Pilot without control head

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Uštedite 6%

Raymarine

T70249

Evolution Tiller Pilot, ACU-100 i Tiller Drive. Napomena: potreban je MFD zaslon ili upravljačka jedinica.

Conçu pour les voiliers à barre franche, le pilote automatique Raymarine Evolution Tiller Pilot T70249 inclut l'unité de contrôle actionneur ACU-100, le capteur EV-1 et un mécanisme d'entraînement de barre franche. Ce système SeaTalk NG offre une assistance au cap précise, avec une calibration automatique du capteur EV-1. Un écran MFD ou un boîtier de commande est nécessaire pour son fonctionnement.

Ce pack comprend : l'unité de contrôle actionneur ACU-100, le capteur EV-1, le mécanisme d'entraînement de barre franche, et les câbles SeaTalk NG nécessaires.

Public priceGet pro pricing

1.792,73€

1.792,73€ ~~1.914,00€~~

UK Isporuke izračunate u trenutku plaćanja.

Na zalihi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Technical specifications

Maksimalna električna potrošnja	180 W
Radni napon	12 V CC

Detailed description

Raymarineov Evolution Tiller Pilot, referenca T70249, integrirano je rješenje namijenjeno jedrilicama s kormilarskom polugom. Sustav kombinira upravljačku jedinicu aktuatora (ACU-100), senzor EV-1 i mehanizam za pogon kormilarske poluge, pružajući preciznu pomoć pri održavanju kursa za obalnu i daljinsku navigaciju. Namijenjen je brodovima malih i srednjih veličina.

Arhitektura sustava Evolution

Srž ovog sustava je senzor EV-1, centralni komponenta Raymarineove Evolution serije. Ovaj senzor integrira kompas, žiroskop i akcelerometar u jednu jedinicu, pojednostavljujući instalaciju i uklanjajući potrebu za složenom kalibracijom. Upravljačka jedinica aktuatora ACU-100 posebno je dimenzionirana za aktuatore kormilarskih poluga male snage, što je razlikuje od modela ACU-200 ili ACU-400, namijenjenih hidrauličkim ili linearnim aktuatorima veće snage za veće brodove.

Povezanost i zahtjevi sučelja

Sustav koristi Raymarineovu SeaTalk NG mrežu za komunikaciju između svojih komponenti i s drugim elektroničkim morskim uređajima. Za upravljanje i prikaz, Evolution Tiller Pilot T70249 zahtijeva kompatibilan Raymarineov multifunkcijski zaslon (MFD) ili zasebnu upravljačku jedinicu za autopilota. Ova arhitektura omogućuje fleksibilnu integraciju u postojeći navigacijski sustav, pružajući korisnicima preciznu kontrolu kursa putem sučelja prilagođenog njihovim potrebama.

Documentation

Type	Nom
	EN - Notice d'installation - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Gabarit de montage - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Declaration de conformite - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Declaration de conformite - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Notice d'installation - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Document technique - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	FR - Notice d'installation - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Declaration de conformite - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Declaration de conformite - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Declaration de conformite - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Gabarit de montage - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.
	EN - Gabarit de montage - Evolution Tiller Pilot, ACU-100 & Tiller Drive. Note: Un écran MFD ou un boitier de commande est nécessaire.

Expert review

Pol CONIN

Digitalni odgovorni

« Technical analysis: Raymarine Evolution Tiller Pilot ACU-100 with Tiller Drive »

The Raymarine Evolution Tiller Pilot with ACU-100 and Tiller Drive is the ideal autopilot solution for small to medium-sized tiller-steered sailboats. Its practical value lies in freeing the helmsman for other onboard tasks while maintaining a stable and precise heading, even in rough sea conditions thanks to the EV-1 sensor. This system is particularly relevant for single-handed sailing or reduced crew, providing valuable assistance for long offshore passages or sail-handling maneuvers.

Installation is simplified by the SeaTalk NG architecture and the EV-1 sensor’s automatic calibration, which requires no complex commissioning procedures. The Tiller Drive is typically mounted on the transom or in the cockpit, with a direct connection to the tiller. However, a Raymarine MFD or a dedicated autopilot control unit (such as a p70s) is required to interact with the system, which is a constraint to consider during installation planning. The ACU-100 is designed for moderate current consumption suitable for tiller drive motors but is not suitable for high-power hydraulic cylinders.

Compared to older solutions or standalone tiller pilots, the Evolution system offers superior piloting intelligence thanks to the Evolution AI algorithm, which learns and adapts to the boat’s characteristics and sea conditions. This results in optimized energy consumption and more effective course-keeping. Its main limitation is its restriction to tiller steering and boats whose drive power requirements are compatible with the ACU-100. For larger vessels or hydraulic steering systems, the ACU-200, ACU-300, or ACU-400 units must be considered.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Evolution Tiller Pilot, ACU-100 i Tiller Drive. Napomena: potreban je MFD zaslon ili upravljačka jedinica.

1.792,73€

1.792,73€ ~~1.914,00€~~

Frequently Asked Questions

Need help? Contact us

What are the main components included in the Raymarine Evolution Tiller Pilot T70249 pack?

The T70249 pack includes the essential components for a tiller pilot system:

The ACU-100 (Actuator Control Unit).The EV-1 sensor, which integrates a compass, a gyroscope, and an accelerometer.A tiller drive mechanism.

Is this autopilot compatible with all types of boats?

No, the Raymarine Evolution Tiller Pilot T70249 autopilot is specifically designed for sailboats with a tiller. It is ideal for small to medium-sized boats.

Is it possible to use this autopilot without a Raymarine multifunction display (MFD)?

No, the T70249 autopilot requires a compatible Raymarine multifunction display (MFD) or a dedicated autopilot control head for operation and data display. These interfaces are essential for system interaction.

Does the EV-1 sensor require complex calibration during installation?

No, the EV-1 sensor is a central component of the Evolution range that greatly simplifies installation. It integrates a compass, a gyroscope, and an accelerometer into a single unit, eliminating the need for complex calibration.

What type of network is used for communication between the different elements of the system?

The Raymarine Evolution Tiller Pilot T70249 autopilot system uses Raymarine's SeaTalk NG network. This network enables seamless communication between the EV-1 sensor, the ACU-100 control unit, and other compatible marine electronic equipment.

Can the ACU-100 actuator control unit be used with hydraulic or linear actuators?

No, the ACU-100 actuator control unit is specifically sized for low-power tiller drives. For higher-power hydraulic or linear actuators suitable for larger vessels, the ACU-200 or ACU-400 models are required.

Is this autopilot suitable for offshore navigation?

Yes, the Raymarine Evolution Tiller Pilot autopilot is designed to provide precise heading assistance, making it suitable for both coastal and offshore navigation.

What are the location requirements for the EV-1 sensor to ensure proper operation?

To ensure the accuracy of the EV-1 sensor, it is critical to mount it in a suitable location. It must be installed at a safe distance from any equipment generating magnetic fields or electromagnetic interference (EMC), such as engines, speakers, or power cables. Respecting these distances ensures reliable heading data.

Our custom installations

All our projects

Imoca Doudous 2025

Complete installation

Gunboat 80 Long-range cruising

Power design and wiring

Evolution Tiller Pilot, ACU-100 i Tiller Drive. Napomena: potreban je MFD zaslon ili upravljačka jedinica.

Technical specifications