Paket i70s Smart Wind System s i70s, RSW Smart Wind, DST810, 5-putnim priključkom, stražnjim kabelom SeaTalk NG dužine 3 metra, napajanjem, T-komadom i 2 terminatora

The T70607 pack is a complete instrumentation solution. It includes:

The i70s instrument displayA RSW Smart Wind wind sensorA DST810 sensor for depth, speed, and water temperatureA 5-way SeaTalk NG connectorA 3-metre SeaTalk NG backbone cableA SeaTalk NG power cableA SeaTalk NG T-pieceTwo SeaTalk NG terminators

The i70s display is designed to show a wide range of navigation data. It can display wind data (apparent and true), depth, boat speed, and water temperature via connected sensors. It can also display battery, boat, distance, engine, fuel, environment, GPS, heading, navigation, autopilot, and time data.

The i70s display is a dedicated instrument display, known for its versatility and SeaTalk NG connectivity. Its main features include:

Display of an extended range of data from multiple data sources (MDS)Customizable display pagesPrecise calibration of wind, depth, speed, rudder, and compass sensorsNative SeaTalk NG connectivity, compatible with NMEA 2000

Yes, the i70s Smart Wind system is fully compatible with the NMEA 2000 network. Its SeaTalk NG connectivity is designed to comply with this standard, enabling seamless integration with other marine equipment using the NMEA 2000 protocol.

Yes, it is possible to connect the i70s display to SeaTalk 1 instruments. However, to establish this connection, a SeaTalk 1 to SeaTalk NG converter is required. This converter is not included in the T70607 pack.

SeaTalk NG is Raymarine's proprietary marine network protocol, NMEA 2000 compatible, which facilitates communication between different onboard instruments. In this pack, the SeaTalk NG network is configured with the following components:

A 5-way connector to centralize connectionsA 3-meter backbone cable for the main network structureA power cable to provide necessary powerA T-piece for additional connectionsTwo terminators to properly terminate the network

For installing the i70s display, you will need basic mounting tools. This typically includes a drill, drill bits, screwdrivers, and measuring tools to prepare the mounting location and secure the unit. The installation manual provides specific details on recommended tools.

The SeaTalk NG network is powered by 12 Volts DC only. The T70607 pack includes a dedicated SeaTalk NG power cable for this connection. It is essential that the product is properly grounded before connecting to the power supply.

Yes, an inline fuse is required for powering the SeaTalk NG system to protect the equipment. The installation manual specifies the exact ratings of the inline fuse and thermal circuit breaker needed for adequate protection.

When installing the i70s display, it is critical to maintain a safe distance from the vessel’s compass. This measure is essential to prevent any magnetic interference that could affect compass accuracy. The exact safe distance is detailed in the product’s installation manual.

For optimal SeaTalk NG wiring, follow these guidelines:

Use cables of appropriate types and lengths.Plan cable runs to respect the minimum bend radius.Provide strain relief to prevent damage to cables or connectors.Ensure proper cable shielding to minimize electromagnetic interference.

Yes, the i70s display offers extensive flexibility for customizing display pages. You can edit existing pages, add new pages, delete those no longer needed, and even reorder pages. Features like automatic page scrolling (Page Rollover) and page locking (Page Lock) are also available.

The brightness of the i70s display can be adjusted directly using the device's controls. Additionally, if the system is configured within a network, it can support a Shared Brightness function for centralized management.

The DST810 sensor is a smart multifunction sensor. It is designed to measure and simultaneously provide three essential data types: depth under the hull, boat speed through the water, and water temperature. This information is then transmitted and displayed on the i70s display.

The RSW Smart Wind sensor is a key component of the system, specifically designed for wind measurement. It provides accurate data on apparent wind and true wind, which are then displayed on the i70s display to assist with navigation and decision-making at sea.

Yes, the i70s display allows calibration of multiple sensors to ensure data accuracy. You can calibrate depth, speed, wind (including alignment and apparent wind speed adjustment), rudder reference, and compass.

To benefit from an extended warranty for your Raymarine product, it is strongly recommended to register it. Warranty registration can be completed directly on Raymarine's official website.

Before connecting power to this product, it must be properly grounded. This grounding must strictly comply with the instructions provided in the installation manual. Additionally, it is critical never to connect this unit to a system using a positive ground.

Yes, the i70s display can show data from an AIS (Automatic Identification System) receiver if a compatible AIS device is connected to the network. You can view AIS targets, adjust display range, and enable or disable AIS silent mode directly from the display.

Yes, the i70s display can support a fuel manager function. This feature allows detection of fuel-related messages and configuration of the manager to monitor fuel consumption and levels aboard the vessel.