Câble de mât 50 mètres pour capteur RSW Smart Wind

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Uštedite 9%

Raymarine

R70945

Kabel jarbola 50 metara za senzor RSW Smart Wind

Le câble de mât Raymarine R70945 de 50 mètres est un accessoire indispensable conçu pour connecter le capteur de vent RSW Smart Wind à sa passerelle ou au réseau SeaTalk NG. Ce composant assure une transmission de données fiable et sans perte sur des installations de grande longueur. Il s'agit d'une pièce de rechange ou d'installation pour le système de vent intelligent RSW de Raymarine, inclus uniquement le câble lui-même.

Public priceGet pro pricing

254,66€

254,66€ ~~282,00€~~

UK Isporuke izračunate u trenutku plaćanja.

Na zalihi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Technical specifications

Broj vodiča	5.0
Boja	Noir
Maksimalni napon	30.0
Ekraniranje	Blindé
Savitljivost	Flexible
Vrsta struje	DC
Materijal vodiča	Cuivre étamé
Certifikati	CE
Završetak vodiča	Étamé
Dužina kabela	50.0
Kompatibilna mreža	SeaTalk NG, NMEA 2000
Preobliveni priključci	Oui (côté capteur), Non (côté passerelle)
Mjesto ugradnje	Mât
Primjena kabela	Liaison capteur de vent, Données et alimentation
Radna temperatura	-25°C à +55°C
Temperatura skladištenja	-30°C à +70°C
Minimalni radijus savijanja	25 mm
Vrsta priključka	Propriétaire (côté capteur), Bornier à vis (côté passerelle)
Otpornost na UV zračenje	Élevée
Vrsta proizvoda	Câble de mât

Detailed description

Namijenjen posebno za integraciju navigacijskih sustava Raymarine, kabel jarbola R70945 od 50 metara ključna je komponenta za inteligentni senzor vjetra RSW Smart Wind. Kabel osigurava vezu između senzora vjetra postavljenog na vrhu jarbola i gateway jedinice ili SeaTalk NG mreže broda, osiguravajući preciznu i pouzdanu transmisiju podataka na velikim udaljenostima.

Integracija i performanse sustava RSW Smart Wind

Sustav RSW Smart Wind tvrtke Raymarine, slično kao i rješenja za mjerenje vjetra tvrtke B&G s H5000 senzorima ili Garmin s GWS 10/20 vjetroznakovima/anemometrima, ističe se integriranim pristupom mjerenju vjetra. Kabel R70945 dimenzioniran je za instalacije na visokim jarbolima, omogućavajući opremanje širokog spektra jedrilica, od krstaša do regatnih brodova. Njegova dužina od 50 metara pruža značajnu fleksibilnost instalacije, izbjegavajući međuspojeve koji bi mogli uzrokovati gubitak signala ili točke kvara. Ova karakteristika ključna je za održavanje integriteta podataka o vjetru, uključujući kut i brzinu, koji su vitalni za automatsko kormilarenje i optimizaciju performansi pod jedrima.

Tehnička izvedba za morske uvjete

Ovaj kabel je pasivni, ali strateški element sustava. Dizajniran je za izdržavanje morskih uvjeta, uključujući izloženost UV zračenju, slanoj vodi i temperaturnim promjenama. Kvaliteta kabliranja od iznimne je važnosti za sprječavanje elektromagnetskih smetnji i osiguravanje stabilne komunikacije između senzora vjetra i RSW gateway jedinice, koja nadalje distribuira podatke putem NMEA 2000 mreže (SeaTalk NG kod Raymarine) do multifunkcijskih ekrana Axiom, Element ili instrumenata i70/i70s. Izbor specijaliziranog kabla kao što je R70945, umjesto opće namjene, jamstvo je kompatibilnosti i performansi za senzor vjetra Smart Wind tvrtke Raymarine, doprinoseći dugovječnosti i preciznosti cijelog navigacijskog sustava.

Documentation

Type	Nom
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Gabarit de montage - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Gabarit de montage - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Declaration de conformite - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Notice d'installation - Câble de mât 50 mètres pour capteur RSW Smart Wind
	EN - Declaration de conformite - Câble de mât 50 mètres pour capteur RSW Smart Wind

Expert review

Pol CONIN

Digitalni odgovorni

« Raymarine R70945 mast cable: backbone of the RSW Smart Wind sensor »

The integration of a high-performance masthead wind sensor like the Raymarine RSW Smart Wind directly depends on the quality and length of the wiring. The R70945 mast cable, with its 50 meters, is designed to meet the requirements of installations on medium to large sailboats. Its length allows direct routing from the sensor to the mast base or navigation console, reducing the risk of multiple connections and signal loss.

During installation, it is essential to follow best practices for cable routing inside the mast, including provision for drip loops and protection against abrasion. While the cable itself is a passive component, its resistance to mechanical and environmental stresses (UV, moisture, salt) is critical for the system's lifespan. Using this proprietary cable ensures electrical compatibility and data fidelity, avoiding interference or signal degradation issues that may occur with unspecified cables.

This model is essential for any new installation or replacement of the RSW Smart Wind sensor, particularly on boats where cable routing is long or complex. It is an investment in the long-term reliability of your wind data, a fundamental parameter for safety and performance at sea.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kabel jarbola 50 metara za senzor RSW Smart Wind

254,66€

254,66€ ~~282,00€~~

Frequently Asked Questions

Need help? Contact us

What is this 50-meter Raymarine mast cable used for?

This cable is specifically designed to connect the Raymarine RSW Smart Wind intelligent wind sensor. It links the wind sensor at the masthead to the bridge unit (gateway) or the vessel's SeaTalk NG network, ensuring accurate and reliable data transmission over long distances.

Which Raymarine wind sensor is this cable compatible with?

This cable is exclusively compatible with the Raymarine RSW Smart Wind wired wind transducer. It is an essential component for integrating this specific system.

What is the exact length of this cable?

This mast cable is 50 meters long. This length is suitable for installations on tall masts, providing notable installation flexibility and helping to avoid intermediate splices.

How does this cable connect to the navigation system?

The cable connects the RSW Smart Wind wind sensor to the RSW gateway unit or directly to the vessel’s SeaTalk NG network. The gateway then distributes the data via the NMEA 2000 network (SeaTalk NG on Raymarine systems) to compatible multifunction displays and instruments.

Is this cable compatible with Raymarine's SeaTalk NG network?

Yes, this cable is a key component of the RSW Smart Wind system, designed to integrate with Raymarine's SeaTalk NG network. It enables the transmission of wind sensor data to the network for display on your instruments.

Are there any recommendations for routing the cable in the mast?

Yes, during installation, it is important to follow general marine wiring guidelines. This includes respecting the cable's minimum bend radius, ensuring strain relief, and creating a drip loop for the mast cable to prevent water ingress. Careful routing helps maintain signal integrity.

What is the resistance of this cable to marine conditions?

This cable is specifically designed for the marine environment. It is manufactured to withstand conditions such as UV exposure, saltwater, and temperature variations, ensuring durability and stable, reliable communication.

Can I cut this cable if 50 meters is too long for my installation?

Yes, the Raymarine RSW Smart Wind sensor installation instructions state that the cable can be cut to the desired length and connected to the bridge. It is critical to follow Raymarine's provided instructions to ensure a correct and reliable connection after cutting.