Ogranak SeaTalk NG duljine 3 metra, gole žice

A bare SeaTalkng spur is a SeaTalkng Raymarine system spur cable (also called a 'spur'). Its distinguishing feature is an unconnected end with bare wires, allowing custom connections to terminal blocks, specific power supplies, or integration of devices without a standard SeaTalkng connector.

This SeaTalkng branch cable is 3 meters long.

The bare end of this cable is designed for installations requiring direct connection to terminal blocks, specific power supplies, or integration of devices not equipped with a standard SeaTalkng connector. It provides flexibility for custom wiring.

This cable is a branch, also called a spur cable, designed to connect individual products to the main SeaTalkng backbone network.

SeaTalkng spur cables are white.

The SeaTalkng system uses small-diameter connectors to simplify installation.

Since this cable has a stripped end, basic wiring tools (such as a wire stripper, screwdriver for terminal blocks, etc.) will be required to make custom connections. The SeaTalkng reference manual lists the tools required for general system installation.

The SeaTalkng system is Raymarine's proprietary interconnect bus, designed to link Raymarine products together via a main backbone and spur cables, facilitating data transmission and power supply.

The SeaTalkng system is structured around a main backbone to which Raymarine products are connected via spur cables. The backbone must be terminated at each end with specific terminators.

The SeaTalkng system is designed to provide a wide range of cable lengths to avoid the need for cutting and splicing standard cables. However, the bare end of this cable is specifically intended for custom connections, which involves handling the wires. Any modification beyond the intended use of the bare end must be done with caution to ensure the integrity of the network.

Yes, it is imperative to install a terminator at each end of the backbone cable of the SeaTalkng system to ensure proper data transmission. Failing to terminate the system correctly may compromise its operation.

The power supply must be connected to the SeaTalkng backbone. The SeaTalkng reference manual provides detailed guidelines on power considerations, including connection points and allowable load for a balanced or unbalanced system.

Yes, the SeaTalkng reference manual contains EMC (Electromagnetic Compatibility) installation guidelines for cable routing to ensure system performance is not compromised. It is recommended to follow these guidelines for optimal installation.

Yes, the stripped end of this cable can be used to connect power, including for specific power supplies or terminal blocks, provided the appropriate SeaTalkng wiring diagrams are followed.

Yes, the SeaTalkng system is designed to power multiple devices via the backbone. However, it is crucial to consider the total load of the connected products and the power limits of the system, as detailed in the SeaTalkng reference manual, to avoid overloading.

Yes, Raymarine ST70 products are designed to connect to the SeaTalkng system via spur cables. This cable, being a SeaTalkng branch, is compatible with the integration of these instruments.

This cable is a SeaTalkng branch. To connect NMEA2000 products to the SeaTalkng system, specific adapter cables are required, as stated in the SeaTalkng reference manual. This bare cable can be used for custom connections, but NMEA2000 integration requires an adapter.

To connect SeaTalk products (referred to as 'SeaTalk(1)' in documentation) to a SeaTalkng system, appropriate adapter cables are required. This bare cable can be used for custom connections, but SeaTalk(1) integration requires an adapter.

This cable is a component of Raymarine's proprietary SeaTalkng system. While the stripped end allows flexible wiring, compatibility with other marine equipment brands will depend on their ability to interface with the SeaTalkng protocol, often via NMEA2000 adapters or custom solutions.