Paket 2 probojna sonara od nehrđajućeg čelika RVM-420, koso 20° lijevo/desno, direktno AXIOM2 i RVM1600 (2 x 2 m, kabel Y i produžni kabel 8 m)

The Raymarine RVM-420 pack (reference T70544) is a complete solution including two stainless steel through-hull transducers, specifically designed for hulls with a deadrise angle of 16° to 24°. It integrates RealVision 3D, DownVision, SideVision, and high-frequency CHIRP technologies for detailed sonar imaging. This pack is intended for port and starboard installation for optimal coverage.

Raymarine RVM-420 transducers integrate multiple advanced sonar technologies for comprehensive underwater visualization:

RealVision 3D: Provides a three-dimensional view of the seabed, structures, and fish.DownVision: Delivers a clear, photographic image of the seabed and underwater structures beneath the boat.SideVision: Enables visualization of structures and fish on the sides of the vessel.High-frequency CHIRP: Enhances target separation and image resolution.

The RVM-420 through-hull transducers are made of stainless steel, ensuring secure mounting and increased durability in the marine environment.

The RVM-420 transducers have a 20° angle. They are specifically designed for sailboat hulls with a deadrise angle between 16° and 24°. This integrated angle ensures optimal performance without requiring a fairing block.

The T70544 pack includes the following:

Two 20° stainless steel through-hull RVM-420 transducers.Two 2 m transducer cables.One Y-cable to connect both transducers to a single input.An 8 m extension cable.

The RVM-420 transducers are directly compatible with Raymarine AXIOM2 multifunction displays. They are also compatible with other models in the Axiom range, such as AXIOM, AXIOM+, AXIOM Pro, AXIOM XL, and AXIOM 2 XL displays, provided they are equipped with the appropriate RealVision MAX sounder module or have integrated RealVision MAX capability.

Yes, these transducers are designed for direct compatibility with Raymarine RVM1600 fishfinder modules, as well as Axiom2 displays that integrate RealVision MAX technology.

The RVM-420 depth sounders are through-hull transducers. This means they are installed by drilling through the boat's hull so the transducer element is in direct contact with the water, ensuring optimal sonar performance.

Yes, the installation of the RVM-420 through-hull transducers requires drilling the hull of the vessel for each transducer. This process is essential for secure mounting and to ensure the transducer is correctly positioned to capture sonar signals.

Yes, antifouling paint can be applied to RVM-420 transducers. It is recommended to follow the specific instructions from the antifouling manufacturer and Raymarine for reapplying antifouling to avoid degrading the transducer's performance.

The pack includes two transducers (one for port and one for starboard) to provide improved and more complete SideVision coverage on both sides of the boat. This setup is particularly beneficial for larger vessels or those seeking detailed side imaging over an extended area.

Yes, transducer positioning is critical for optimal performance. It is recommended to install them in an area where the water flow is smooth and free of turbulence, away from propellers, keels, through-hull fittings, or other transducers. Specific guidelines are provided in the installation manual for fiberglass cored hulls.

Yes, calibration is required after installation. The RVM-420 transducers require AHRS (Attitude and Heading Reference System) RealVision calibration to ensure 3D image accuracy and general sonar transducer calibration for correct depth and imaging readings.

The RVM-420 transducer pack includes:

Two 2-meter transducer cables. A Y-cable to connect both transducers. An 8-meter extension cable. This provides sufficient combined cable length for many installation setups.

The RVM-420 transducers transmit a full range of sonar data to your compatible Raymarine display, including:

Detailed 3D images of the seabed and structures.DownVision views beneath the boat.SideVision views of the sides of the boat.Accurate depth data.Fish detection and identification.

Although the installation manual provides the exact list, installing through-hull transducers like the RVM-420 typically requires basic hull-work tools, such as:

An electric drill.Hole saws in various sizes for cutting through the hull.Measuring tools.Marine sealants.Appropriate wrenches and screwdrivers for assembly.

Yes, it is strongly recommended to ensure your compatible Raymarine multifunction display (such as the AXIOM2) is running the latest LightHouse software version. Software updates ensure optimal compatibility and access to all RVM-420 transducer features.

The durability of the RVM-420 depth sounders is ensured by their stainless steel construction, a material known for its corrosion resistance and robustness in harsh marine environments. Additionally, their through-hull installation ensures a secure and durable mounting.

To maintain optimal performance of the RVM-420 depth sounders, regular maintenance is recommended, including:

Routine checks to ensure the absence of damage or obstructions.Cleaning the probe surfaces to remove marine fouling.Reapplying antifouling paint if necessary, following the appropriate guidelines.

Yes, the Y-cable and extension cable included in the kit are designed specifically for RealVision sounders in the RVM-400 series, including the RVM-420, and for connecting them to compatible Raymarine sounder modules or multifunction displays. They ensure optimal connectivity and performance.