Paket 2 sonde za bočno postavljanje od nehrđajućeg čelika 12° lijevo/desno RVM-412, izravna kompatibilnost s AXIOM2 i RVM1600 (2 x 2 m, kabel Y i produžetak 8 m)

The Raymarine RVM-412 sonar transducer kit is designed to provide detailed, three-dimensional underwater imaging using RealVision Max 3D technology. It enables visualization of seabed structure, fish, and submerged objects with enhanced clarity, which is critical for fishing and navigation.

The RVM-412 transducers are through-hull stainless steel transducers, specifically angled at 12°. They are designed to be installed on port and starboard sides, optimizing RealVision Max 3D sonar performance on hulls with a significant deadrise angle (between 8° and 15°).

The RVM-412 sounders use Sonar RealVision Max 3D technology. This technology provides three-dimensional underwater imaging, enabling detailed visualization of the seabed and submerged objects.

Including two transducers, one for port and one for starboard, ensures consistent SideVision and DownVision coverage without blind spots. This setup is particularly beneficial for hulls with significant deadrise angles, guaranteeing optimal signal quality.

The RVM-412 depth sounders are made of stainless steel, a robust material suitable for demanding marine environments.

This pack is specifically designed for deep-V hulls with a deadrise angle between 8° and 15°. The 12° tilt of the transducers is optimized for these hull types.

Yes, the RVM-412 pack includes complete wiring: two 2-meter depth sounder cables each, a Y-cable for combined connection of both transducers, and an 8-meter extension.

The RVM-412 transducers are directly compatible with the Raymarine AXIOM2 multifunction display range.

Yes, the RVM-412 transducer pack is compatible with the Raymarine RVM1600 fishfinder module.

Yes, the RVM-412 transducers integrate seamlessly with Raymarine's LightHouse 4 ecosystem, ensuring straightforward installation and configuration.

The pack is designed to integrate with the LightHouse 4 ecosystem. It is always recommended to ensure your AXIOM2 display or RVM1600 module runs the latest LightHouse software version for optimal performance.

After installation, an AHRS (Attitude and Heading Reference System) calibration from RealVision is required. This calibration ensures precise stabilization of the sonar image for optimal visualization.

Typical tools for installing through-hull transducers include a drill, drill bits suitable for hull drilling, wrenches, marine sealant, and cleaning products. Detailed instructions are provided in the installation manual.

Installation involves drilling holes in the hull. For fiberglass sandwich hulls, specific precautions are required to seal the core and prevent water infiltration. It is crucial to follow the manual's instructions for positioning and drilling.

Yes, antifouling paint can be applied to transducers. It is important to use compatible products and follow the manufacturer's recommendations to avoid degrading transducer performance.

The pack includes two depth sounder cables, each 2 meters long, one Y-cable, and an 8-meter extension, providing flexible total length for installation.

The two 2-metre transducers connect to a Y-cable included in the kit. This Y-cable combines the signals from both transducers before routing them to the display or sounder module via the 8-metre extension.

Yes, it is recommended to follow general marine equipment wiring guidelines, particularly regarding cable routing, protection against stress, and shielding to avoid electromagnetic interference (EMC).

After installation, it is recommended to run a transducer test and AHRS RealVision calibration. The LightHouse 4 system user manual provides instructions for checking sonar data and troubleshooting.

The 12° tilt of the transducers is critical to compensate for the hull's deadrise angle (V). This ensures the sonar beam is directed vertically toward the seabed, even when the boat is stationary or moving, thus providing a stable and accurate sonar image.