Prikazivač i50 Depth sonara

The Raymarine i50 Depth display is a navigation instrument specifically designed to accurately show underwater depth. It is ideal for safe navigation, particularly in areas with high tidal range or shallow waters.

The display has compact dimensions of 110 x 115 x 44 mm (width x height x depth). Its design allows for perfect flush mounting on your boat's console or dashboard.

Yes, this instrument is designed for harsh marine environments. It has IPX6 waterproofing, which effectively protects it against breaking waves and heavy water spray.

Absolutely. The display features very large digits and offers excellent viewing angles (+70° / -70°), ensuring perfect readability both day and night, even when offset from the instrument.

The display manages several essential sound and visual alarms for safety: a shallow water alarm (minimum depth) and a maximum depth alarm. You can set the thresholds according to your navigation needs.

Yes, you can configure the measurement unit to your preference during user calibration. The display allows you to set depth in meters (m), feet (ft), or fathoms (fa).

Yes, it features adjustable backlighting. Additionally, if connected to a SeaTalk NG network, it can participate in group illumination, allowing synchronization of the backlighting level across all compatible Raymarine instruments.

No, reference E70059 corresponds to the i50 Depth display sold separately (without sensor). If you do not have an existing transducer, you will need to purchase a compatible depth transducer separately or choose a complete pack.

The i50 Depth is dedicated solely to displaying depth. The i50 Tridata, on the other hand, combines depth, speed (log), and water temperature data on a single screen divided into three zones.

Installation is done by flush-mounting. A template is provided to precisely cut your console. The screen is then secured from the front, and the bezel (lens) clips on top for a clean finish.

The instrument operates on a 12 V DC electrical system. Its acceptable operating voltage range is from 10 V to 16 V DC.

The device is powered directly via the SeaTalk NG network. Simply provide a 12V power supply to the main SeaTalk NG backbone circuit, which will then distribute the current to the display via its spur cable.

Yes, the installation must be protected. The SeaTalk NG power cable must be connected to the 12V battery via an inline 5 amp fuse or an equivalent thermal circuit breaker.

The i50 Depth display has a dedicated rear connection (crimp-type terminals) allowing direct connection of the wires from a compatible Raymarine or Airmar analog depth sounder transducer.

Yes, the display is fully compatible with the NMEA2000 protocol via Raymarine's SeaTalk NG connectivity. It can thus share depth data with your chartplotters and other NMEA2000 devices.

Yes. The i50 Depth is designed to be backward-compatible with the old SeaTalk 1 standard. It includes the necessary connectors to integrate easily into legacy instrument networks (such as the ST60 series).

The display is compatible with numerous analog Raymarine and Airmar depth sounders, such as the P17, P319, P79 (In-hull), B17, B45, or the P66. You can use through-hull, glue-on, or transom-mount transducers.

Yes. If the depth sounder transducer is connected to another instrument or a sounder module on the network, the i50 Depth will automatically configure itself in Repeater mode to display data received via the SeaTalk NG or SeaTalk 1 network.

Only a clean, damp cloth should be used to wipe the screen. Never use abrasive, acidic, ammonia-based, or solvent products, as they may damage the screen treatment and compromise waterproofing.