Type 0.5 Autopilot hydraulic pump for 12 volt systems

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Uštedite 9%

Raymarine

E12139

Reverzibilna pumpa T0.5 - 12V

La pompe réversible T0.5 - 12V Raymarine (E12139) est l'option la plus compacte de la gamme de pompes hydrauliques Raymarine, idéale pour les systèmes de pilotage automatique et vérins de 50 à 110 cc. Conçue pour une intégration fiable avec les ordinateurs de cours SPX ou les unités ACU Evolution, elle bénéficie d'une protection IP67 pour les environnements moteur. Le produit inclut la pompe hydraulique, trois joints 1/4 in BSP en caoutchouc/métal, et trois adaptateurs 1/4 in BSP vers 1/4 in NPT (si nécessaires).

Public priceGet pro pricing

880,85€

880,85€ ~~978,00€~~

UK Isporuke izračunate u trenutku plaćanja.

Na zalihi

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat for onboard equipment installation

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional installation assistance

Technical specifications

Maksimalna električna potrošnja	108 W
Tipična električna potrošnja	108 W
Radni napon	12 V
Radna temperatura	-25°C à +55°C
Preporučena vrijednost osigurača	15 A
Širina proizvoda	103 mm
Visina proizvoda	89 mm
Dubina proizvoda	203 mm
IP zaštitni stupanj	IP67
Vrsta montaže	Fixation boulonnée
Certifikati	CE, EN60945, IEC 60529 IP67
Displacement	50-110 cc
Tip aktuatora	Pompe hydraulique réversible
Priložena montažna oprema (vijci, matice)	Non
Orijentacija montaže	Toutes orientations, à condition que le moteur ne soit pas sous le corps de la pompe
Maksimalni tlak	55 bar (800 psi)
Ugrađeni senzor kuta kormila	Non
Isključivo	Non

Detailed description

Namijenjena sustavima za automatsko kormilarenje Raymarine, reverzibilna pumpa T0.5 - 12V Raymarine (E12139) je hidraulična jedinica pogodna za brodove opremljene postojećim hidrauličkim kormilom ili mehaničkim sustavom s pomoćnim cilindrom. Kao najkompaktnija u seriji hidrauličnih pumpi Raymarine, idealna je za cilindre kapaciteta 50 do 110 cc (3.1 do 6.7 in³).

Performanse i integracija

Ova pumpa tipa 0.5 ima maksimalni protok od 600 cc/min (36.6 in³/min) bez opterećenja, s maksimalnim intermitentnim tlakom od 55 bar (800 psi) pri 12 V. Tipična potrošnja iznosi 9 A pri 12 V pod 55 bar. Elektromotor pumpe, napajan s 12 V DC, izveden je s zaštitom IP67 i može se ukloniti bez narušavanja nepropusnosti hidrauličkog sustava. Ugrađeni su pilotirani povratni ventili koji sprječavaju protjecanje kroz ručno kormilarenje i kompatibilna je s uravnoteženim i neuravnoteženim cilindrima, kao i sustavima s tlačnim spremnikom.

Usporedba i fizičke specifikacije

Pumpa T0.5 (E12139) razlikuje se od većih modela u seriji Raymarine, poput pumpi tipa 1 (M81120/M81119), tipa 2 (M81121/M81123) i tipa 3 (M81122/M81124), po kapacitetu cilindra i protoku, što ju čini prikladnom za instalacije male do srednje veličine. Dok T0.5 podržava do 110 cc, tip 1 doseže 230 cc, tip 2 350 cc, a tip 3 500 cc. Kompaktne dimenzije (A: 58.4 mm, B: 203 mm) i BSPP priključci od 1/4 inča olakšavaju instalaciju ispod palube, udaljeno od izvora topline i vibracija. Usklađena je s normama CE, uključujući smjernicu EMC 2004/108/EZ i normu EN60945:2002.

Documentation

Type	Nom
	EN - Notice d'installation - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v

Expert review

Pol CONIN

Digitalni odgovorni

« Technical analysis of the Raymarine T0.5 hydraulic pump for autopilot »

The reversible T0.5 - 12V Raymarine hydraulic pump (E12139) is a key component for autopilot systems on small to medium-sized vessels. Its specification for 50 to 110 cc cylinders positions it as Raymarine's entry-level solution for hydraulic steering, targeting sailboats or small motor yachts whose cylinder volume falls within this range. It is particularly suitable when installation space is limited, thanks to its compact dimensions.

Integrating this pump into an existing system requires careful attention to hydraulic circuit cleanliness to ensure proper operation of the integrated check valves. Installation must be done below deck, away from excessive heat sources or vibrations, to ensure system longevity. Its 12V design and 9A consumption at 55 bar make it compatible with the standard electrical architectures of most recreational boaters, without excessively draining service batteries, unlike larger-capacity pumps such as the Type 2 or Type 3, which can draw 24A or 34A at 12V.

Although the manual recommends installation by a Raymarine authorized service representative, for an experienced marine electronics and hydraulics installer, this pump is straightforward to implement, provided the electrical connection directives to an Evolution ACU (Actuator Control Unit) or an SPX course computer are strictly followed. It is important to note that this pump is not suitable for large-capacity hydraulic cylinders, for which the T1, T2, or T3 models would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Reverzibilna pumpa T0.5 - 12V

880,85€

880,85€ ~~978,00€~~

Frequently Asked Questions

Need help? Contact us

Which type of steering system is this pump designed for?

The Raymarine T0.5 reversible pump is primarily designed for vessels equipped with an existing hydraulic steering system. It can also be used on vessels with a mechanical steering system, provided it is paired with a secondary steering cylinder.

What is the maximum hydraulic cylinder capacity this pump can handle?

This T0.5 hydraulic pump is suitable for cylinders with a capacity between 50 and 110 cc (3.1 to 6.7 in³).

What are the key performance specs of the T0.5 reversible pump in terms of flow rate and pressure?

The T0.5 reversible pump delivers the following performance at 12 V:

Peak flow rate (no load): 600 cc/min (36.6 in³/min)Maximum intermittent pressure: 55 bar (800 psi)Typical current draw: 9 A at 55 bar

Where should I install the Raymarine T0.5 pump on my boat?

The T0.5 pump is designed for installation below deck only. For optimal performance and to prevent damage, it is recommended to install it:

On a solid structure to minimize vibrations.Away from heat sources, excessive vibrations, and fumes.Away from confined areas containing flammable materials.Preferably above the waterline.A thorough cleanliness is essential during installation of hydraulic systems to prevent dirt particles from affecting the operation of check valves.

Is this pump compatible with balanced or unbalanced hydraulic cylinders?

Yes, the Raymarine T0.5 reversible pump is compatible with both balanced and unbalanced hydraulic cylinders. It can also be used with pressurized reservoir systems.

Is the pump motor waterproof and can it be easily removed?

Yes, the pump motor is rated IP67, ensuring protection against temporary immersion in water. It can be removed from the pump without compromising the hydraulic system's watertight integrity or causing fluid leaks.

What are the hydraulic connections for the T0.5 pump?

All hydraulic ports on the Raymarine T0.5 reversible pump are 1/4 inch BSPP (parallel thread).

Which Raymarine autopilot systems is this pump compatible with?

The Raymarine T0.5 reversible pump is designed to integrate with Raymarine autopilot systems. It is compatible with the SPX course computer or the Evolution ACU (Actuator Control Unit).