Provodnik horizontalni za kabele promjera 6 do 10 mm - Sivi

The Scanstrut DS-HD10 cable gland is a professional sealing solution designed for passing two cables through a boat deck or bulkhead. It ensures a clean installation and protects the interior of the boat from water ingress and external elements.

The Scanstrut DS-HD10 cable gland is specifically designed to accommodate two cables simultaneously, providing a dual solution for installations requiring the passage of multiple cables of similar size.

The Scanstrut DS-HD10 cable gland has a length of 75.1 mm (2.95 inches) and a width of 66.5 mm (2.61 inches). Its height or depth is 28.5 mm (1.12 inches).

The Scanstrut DS-HD10 cable gland is gray, allowing it to blend discreetly into most dashboards and decks.

The primary function of the DS-HD10 cable gland is to ensure optimal watertight sealing for the passage of two marine cables, thereby protecting electronic equipment and the boat's interior from water ingress, UV rays, and spray.

The DS-HD10 cable gland is manufactured by Scanstrut using robust and durable materials designed to withstand UV exposure, salt spray, and mechanical stress in marine environments.

Yes, the Scanstrut DS-HD10 cable gland is designed to be UV-resistant, ensuring durability and retention of its properties and color even after prolonged sun exposure.

The Scanstrut DS-HD10 cable gland is compatible with cables ranging from 6 mm to 10 mm in diameter (0.23 to 0.39 inches).

The DS-HD10 cable gland is supplied with a set of 12 bungs (6 pairs), including pairs for the following cable diameters: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, as well as blank bungs (without holes) to seal an unused cable passage or for customization.

Yes, the DS-HD10 is a complement to other products in the Scanstrut range. It provides a double solution for installations similar to those using the DS-H6 (for a single cable from 2 to 6 mm) or the DS-H10 (for a single cable from 6 to 10 mm).

Yes, this cable gland can be installed on various materials. It is compatible with soft materials (such as plywood), hard materials (such as fiberglass, hardwoods, acrylic) and metal surfaces (such as steel and aluminum). The screw fastening method may vary depending on the material type.

To install the Scanstrut DS-HD10 cable gland, a 32 mm (1-1/4 inches) diameter hole must be drilled.

For installation, you will need the following tools: a Pozidriv screwdriver, silicone sealant, 2.5 mm (3/32 inch) or 3 mm (1/8 inch) drill bits depending on the surface material, and a hole saw or 32 mm (1-1/4 inch) drill bit.

Four self-tapping screws size #6 x 16 are included in the package for mounting the cable gland base on soft or hard materials.

No, for installation on metal surfaces (such as steel or aluminum), it is recommended to use M3 countersunk bolts over 12 mm with a washer and Nyloc nut. These components are not included in the package and must be purchased separately.

You must select the bungie with the diameter closest to that of your cable. The cable gland comes with pairs of bungies in different sizes (6 mm, 7 mm, 8 mm, 9 mm, 10 mm) and blank bungies to adapt to your needs.

Yes, it is important to carefully deburr the drilled hole before installing the cable gland. This ensures a smooth surface and better adhesion for optimal sealing.

Waterproofing is ensured by several elements: the two-part design of the cable gland with an integrated gasket, the use of bungs sized exactly to each cable diameter, and the recommended application of silicone when securing the base to the surface.

The footprint, or the area covered by the cable gland once installed, is 75.1 mm long by 66.5 mm wide. A cutting template is provided in the instructions to simplify positioning and installation.