Provodnik za spojnicu do promjera Ø40 mm, kabel 12-15 mm - crni kompozit

This Scanstrut DS40-P-BLK deck gland is designed to accommodate connectors with a diameter up to 40 mm.

This deck gland is specifically suitable for cables with a diameter between 12 and 15 mm.

The Scanstrut DS40-P-BLK deck gland is made of black composite, providing good resistance in marine environments while remaining lightweight.

For the installation of this deck gland, you will need the following tools:

A Pozidriv screwdriver
Silicone sealant
A 40 mm hole saw
A 2.5 mm or 3 mm drill bit (depending on the hardness of your mounting surface)

The DS40-P-BLK is the black composite (plastic) version, which is a lightweight and economical alternative. The DS40-S, on the other hand, is the version made of stainless steel, offering different robustness and finish.

The main difference lies in their capacity and hole size. The DS40 is designed for connectors up to Ø40 mm and cables 12-15 mm, requiring a Ø40 mm hole. The DS30 is suitable for cables 9-14 mm and requires a Ø30 mm hole.

Four No. 6 x 16 self-tapping screws are included in the kit for securing the deck gland to your mounting bracket.

Yes, applying silicone is essential to ensure a watertight seal around the drilled hole and under the deck gland base, thus protecting the interior of your vessel from water ingress.

The drill bit diameter for pilot holes depends on the material of your support:

For soft materials (e.g., plywood): use a 2.5 mm (3/32 inch) drill bit.For hard materials (e.g., fiberglass, acrylic, hardwoods): use a 3 mm (1/8 inch) drill bit.

Yes, the Scanstrut DS40-P-BLK deck gland is waterproof, specifically designed to provide reliable protection against water for cable passes on boat decks.

Yes, this deck gland is designed for vertical installation, making it ideal for cable runs through decks or vertical bulkheads on your vessel.

The M4X10 black bolt is a key component for assembling the deck pass-through. It securely fastens the hull to the base, ensuring the assembly remains cohesive.

Yes, the Scanstrut DS40-P-BLK is a marine-grade product specifically designed to withstand demanding marine environments, thanks to its black composite construction.

To ensure optimal watertightness, apply marine-grade silicone around the drilled hole and under the bridge deck base before securing it with the supplied screws. Make sure all surfaces are clean and dry before application.

Yes, the Scanstrut DS40-P-BLK deck gland is supplied with detailed installation instructions to guide you step-by-step through the mounting process.

This deck gland is optimized for cables with a diameter of 12 to 15 mm. For cables with a smaller diameter, it would be more appropriate to consider a different Scanstrut model, such as the DS30, which is designed for cables of 9-14 mm, to ensure optimal sealing and compatibility.