Helm Pod - za 8'' ekran + 4 pokazivača ili 12'' ekran + 2 pokazivača

A Helm Pod Scanstrut is a mounting solution designed to install and protect your electronic equipment (multifunction displays, instrument displays) at your boat's helm. It centralizes and organizes your navigation instruments for improved ergonomics and visibility while protecting them from marine elements.

This Helm Pod supports two main configurations:

An 8-inch display paired with four additional repeaters. Or a 12-inch display combined with two repeaters.

The Helm Pod Scanstrut SPH-SYSTEM-W is made from a high-quality marine composite. This material is selected for its robustness, UV resistance, and durability in the marine environment.

Yes, Scanstrut Helm Pods are designed with waterproofing to protect electronic equipment from water, spray, and harsh weather. They typically feature watertight seals to ensure optimal protection.

The Helm Pod SPH-SYSTEM-W is specifically designed to be installed on a binnacle or console mount. It is compatible with standard tiller diameters, typically between 25 mm and 33.7 mm.

Yes, Scanstrut Helm Pods are generally equipped with a mechanism to adjust the viewing angle of all instruments. This allows the helmsman to optimize screen visibility based on their position and sailing conditions.

The Helm Pod integrates a cable management system for internal routing. Cables are routed through the support in a clean and secure manner, protecting them from the elements and preventing clutter at the helm station.

The Helm Pod is designed to fit standard 8-inch and 12-inch display dimensions. While it is universally compatible with most brands adhering to these sizes, it is recommended to verify the exact dimensions of your screen and displays against the pod's cutouts or available mounting surface.

Using a Helm Pod offers several advantages over individual mounts:

Enhanced protection: It protects all equipment from marine elements.Seamless integration: It centralizes instruments for a sleek and professional aesthetic.Improved ergonomics: Instruments are grouped for easier reading and operation.Cable management: It ensures clean and secure cable routing.

Yes, the Helm Pod Scanstrut SPH-SYSTEM-W is a versatile, essential component suitable for both sailboats and powerboats that require professional and secure installation of electronics at the helm.

Installing the Helm Pod requires basic marine mounting tools such as drills, wrenches, and screwdrivers. Specific tools may be needed for precise panel cutting if adapting non-standard instruments, but standard configurations only require common tools.

For correct installation, it is essential to measure the diameter of your helm pod (binnacle). The Helm Pod SPH-SYSTEM-W is designed to fit standard tube diameters, typically between 25 mm and 33.7 mm. Ensure your helm pod diameter falls within this range.

Yes, as a Scanstrut marine product, the Helm Pod SPH-SYSTEM-W is designed to withstand harsh marine environments, including salt corrosion. The materials used are selected for their durability and resistance to degradation caused by salt and moisture.

The "displays" mentioned in the configurations (4 displays with an 8'' screen, or 2 displays with a 12'' screen) generally refer to standard marine instrument displays. These are very often NMEA 2000 compatible, but the specific compatibility will depend on the instruments you choose to install.

Scanstrut Helm Pods are typically supplied with the required mounting hardware for installation on the helm pedestal, including screws and sealing gaskets needed for a secure and watertight fit.

The Helm Pod is designed to be mounted directly on the helm pedestal, above or in front of the wheel, to position the displays and gauges at an optimal height and viewing angle for the helmsman. Its position ensures easy reading of data without obstructing the view.

Yes, as a Scanstrut product, the Helm Pod SPH-SYSTEM-W is covered by the manufacturer's standard warranty. Specific warranty details are provided by Scanstrut.

Although robust, the Helm Pod is designed to be manageable by a single person during installation. Its weight is optimized for strength without being excessively heavy, making positioning and securing to the tiller head straightforward.