Kabel H07RN-F gipka 3x1,5 mm²

H07RN-F flexible copper cable 3X1.5 mm² is used for electrical wiring on board, including power, control, or auxiliary connections, depending on its cross-section and the H07RN-F rubber family.

The wire gauge must be sized based on current intensity, round-trip length, acceptable voltage drop, and upstream protection installed.

The specified configuration is 3X1.5 mm². The letter G typically indicates the presence of a green/yellow conductor, while X denotes a version without a protective conductor.

Check the actual route, bend radius, bulkhead penetrations, mechanical protection, and marking of both ends before crimping.

Installation depends on the cable family and its sheath. In wet or exposed environments, use protected routing and properly insulated terminations.

Yes. This reference is managed in meters in Odoo: order the quantity corresponding to the required length, allowing for routing and service loops.