EasySolar 12/1600 MPPT

The Victron EasySolar 12/1600/70-16 MPPT 100/50 is an all-in-one solar power solution. It integrates an MPPT solar charge controller, a MultiPlus Compact inverter/charger, and AC distribution into a single enclosure. It is designed to simplify installation and energy management from solar and AC sources, particularly for marine applications.

The integrated MultiPlus Compact 12/1600/70 inverter/charger can deliver a continuous power output of 1600 VA (1300 W) at 25°C. Its peak power is 3000 W.

The Victron EasySolar 12/1600/70-16 MPPT 100/50 is designed to operate with a battery system with a nominal voltage of 12 V.

Yes, the EasySolar can charge batteries and power loads from a mains power supply or a generator. It has an AC input voltage range of 187 to 265 V AC.

You can connect up to three photovoltaic (PV) panel strings to the EasySolar via the three dedicated PV MC4 (PV-ST01) PV connector sets.

The BlueSolar MPPT 100/50 solar charge controller can handle up to 700 W of PV power for a 12 V battery system.

The MPPT 100/50 solar charge controller supports a maximum open-circuit voltage of solar panels of 100 V.

PowerAssist technology protects the power supply of the mains or generator from overloads. If power demand exceeds the capacity of the external power source, the inverter adds extra power to compensate, preventing power cuts or circuit breaker trips.

Yes, if the grid power fails or the shore/generator power is disconnected, the MultiPlus Compact inverter automatically activates and takes over to power the connected loads. This transfer is so fast (less than 20 milliseconds) that electronic equipment continues to operate without interruption.

The integrated AC distribution includes a 30 mA/16 A residual current device (RCD) and four AC outputs. These outputs are protected by two 10 A circuit breakers and two 16 A circuit breakers. One of the 16 A outputs is controlled by the AC input and only activates when AC power is available.

The integrated battery charger (MultiPlus Compact) can provide a maximum charging current of 70 A for the service battery.

Yes, the MultiPlus Compact features an adaptive battery management system controlled by a microprocessor, with a 4-stage charging characteristic (bulk, absorption, float, storage). It can be preconfigured to suit different battery types and automatically optimizes the charging process based on battery usage.

Yes, the EasySolar includes full protections, including against:

Short circuits on the outputOverloadsToo high or too low battery voltagesOverheating230 V AC present on the inverter outputExcessive input voltage ripple

The dimensions of the EasySolar are 745 x 214 x 110 mm (height x width x depth). Its weight is 15 kg.

The EasySolar can operate within a temperature range of -20 to +50°C. It features a fan-assisted cooling system to maintain optimal performance.

Yes, the SmartSolar MPPT controller uses an innovative maximum power point tracking algorithm. In case of partial shading, it can find the optimal maximum power point, maximizing energy harvest, unlike conventional MPPTs that may get stuck on a local MPP.

Yes, the EasySolar ships with 1.5-meter DC battery cables, simplifying installation.

Yes, the EasySolar can be controlled remotely. You can use a 3-position switch or a Multi Control digital display panel to manage its functions.

The EasySolar 12/1600/70-16 MPPT 100/50 has an IP21 protection rating, meaning it is protected against solid objects larger than 12.5 mm and against vertically falling water droplets.

Yes, each MultiPlus Compact is supplied with a battery temperature sensor. When connected, the charging voltage automatically decreases as the battery temperature rises, which is particularly recommended for sealed batteries and/or in cases of significant battery temperature fluctuations.