Ispravljač 12/1600 Smart

The Victron Energy Inverter 12/1600 Smart is a power converter that transforms a 12V direct current (DC) voltage, typically from a battery, into a 230V alternating current (AC) voltage with a pure sine wave. It is designed to provide stable and reliable power for various electrical devices, particularly in marine and mobile applications.

ECO mode allows the inverter to enter standby when the connected load drops below a predefined value (the default minimum load is 15W). Once in standby, the inverter briefly activates (by default every 2.5 seconds, adjustable) to check if the load has increased. If the load exceeds a predefined level, the inverter remains on, which helps save battery energy.

The inverter includes several protections to ensure reliability and the safety of the installation:

Short-circuit protection on outputOverload protectionOver-voltage protection (high battery voltage)Under-voltage protection (low battery voltage)Over-temperature protectionExcessive DC ripple protection

The Victron Energy Inverter 12/1600 Smart produces a pure sine wave AC output signal. This type of signal is ideal for powering all types of sensitive electronic devices, ensuring stable and interference-free operation.

This inverter can operate within a temperature range from -40°C to +65°C. It is equipped with a fan-assisted cooling system. It is important to note that beyond 40°C, the continuous output power is reduced by 1.25% per degree Celsius.

The full-bridge topology with a toroidal transformer is known for its proven reliability over many years. It ensures inverter robustness, effectively protecting against short circuits and overheating, whether caused by overload or high ambient temperature.

The inverter has an IP21 protection rating. This means it is protected against solid objects larger than 12.5 mm and against vertically falling water droplets. The maximum allowed ambient humidity is 95% without condensation. It is important to avoid direct contact with water and not to expose it to rain or direct moisture.

For optimal operation, the inverter must be installed on a flat surface. It is recommended to mount it at the base or vertically on a wall with the fan at the bottom. It is crucial to leave at least 10 centimeters of free space around the inverter to ensure adequate ventilation and prevent airflow obstruction. Avoid direct sunlight and humid or dusty environments.

Yes, the Victron Energy Inverter 12/1600 Smart is a Class I safety product and its chassis must be grounded. A grounding point is located on the outside of the product. The ground conductor, connecting the chassis ground terminal to ground, must have at least half the cross-section of the conductors used for the battery connection.

A remote on/off switch can be connected to the inverter's bipolar connector. Alternatively, the left contact of this connector can be wired to the battery's positive terminal, which is useful for automotive applications by connecting it to the ignition switch. The inverter's front switch must also be set to "On" or "ECO" for the inverter to start.

Yes, the Victron Energy Inverter 12/1600 Smart is available with different AC output socket options to comply with various regional standards. Options include Schuko (CEE 7/4), UK (BS 1363), AU/NZ (AS/NZS 3112), or IEC-320 (a male plug is included for the latter).

This inverter is designed to work with DC battery systems providing 12V. It is compatible with most 12V battery types, including lead-acid batteries (gel, AGM, flooded) and lithium batteries, provided they can supply the required current.

Yes, the inverter includes a VE.Direct communication port. You can connect it to a computer using a VE.Direct to USB interface cable (sold separately). For smartphones and tablets (Apple and Android), as well as MacBooks, a VE.Direct Smart Bluetooth dongle (sold separately) is required for wireless connectivity.

No, it is imperative never to connect the AC output of the inverter to another AC source, whether a domestic wall outlet or a generator. This could severely damage the inverter. To transfer the load to another AC source, it is recommended to use an automatic transfer switch such as the Victron Energy Filax, which ensures fast and secure switching.

The inverter offers configuration flexibility via its VE.Direct port. You can adjust several parameters, including:

Battery low alarm and reset levelsBattery low cut-off and restart levels, including dynamic cut-off (load-dependent)AC output voltage (between 210 and 245V)Output frequency (50 Hz or 60 Hz)ECO mode activation/deactivation and its detection level