Upravljač punjenja SmartSolar MPPT 100/30

Ultra-fast MPPT (Maximum Power Point Tracking) technology allows the SmartSolar MPPT 100/30 charge controller to optimize solar energy harvesting. It is particularly effective when light intensity changes continuously, such as under cloudy skies or in partial shading conditions.

Energy harvest improvements of up to 30% compared to PWM charge controllers.Up to 10% improvement compared to slower MPPT controllers.Advanced maximum power point detection, even with multiple power points due to partial shading.

The SmartSolar MPPT 100/30 charge controller delivers a maximum conversion efficiency exceeding 98%. This high efficiency ensures optimal use of the solar energy captured by your panels.

No, the SmartSolar MPPT 100/30 charge controller does not require a cooling fan. Its design allows for efficient heat dissipation, enabling it to deliver maximum output current up to an ambient temperature of 40 °C without a fan.

The SmartSolar MPPT 100/30 controller integrates comprehensive electronic protections to ensure system safety and durability. These include:

Overheat protection and power reduction in case of high temperature.Protection against PV short-circuits.Protection against PV polarity reversal.Protection against PV reverse current.Protection against output short-circuits.

The SmartSolar MPPT 100/30 controller is designed to operate within a temperature range from -30 °C to +60 °C. It can deliver its full rated power up to an ambient temperature of 40 °C.

The maximum nominal charge current that the SmartSolar MPPT 100/30 charge controller can supply to the battery is 30 amperes (30 A).

The quiescent current draw of the SmartSolar MPPT 100/30 controller is 30 mA for a 12 V battery system and 20 mA for a 24 V battery system.

The SmartSolar MPPT 100/30 controller features advanced maximum power point tracking that efficiently manages partial shading conditions. In cases of partial shading, multiple maximum power points can appear on the power-voltage curve. Victron Energy’s innovative algorithm ensures the controller always locks onto the optimal maximum power point, maximizing energy harvest.

Yes, the SmartSolar MPPT 100/30 controller has an internal temperature sensor. This sensor is used to compensate the absorption and float charge voltage based on battery temperature, optimizing the charging process.

The dimensions of the SmartSolar MPPT 100/30 controller are 130 mm (height) x 186 mm (width) x 70 mm (depth). Its weight is 1.3 kg.

The SmartSolar MPPT 100/30 controller is compatible with 12 V and 24 V battery systems. It features automatic voltage selection.

The SmartSolar MPPT 100/30 controller is compatible with a wide range of battery types, including:

AGM batteriesGel batteriesFlooded lead-acid batteriesLithium batteries (LiFePO4)It also features a recovery function for fully discharged Li-ion batteries with integrated disconnection.

The SmartSolar MPPT 100/30 controller can handle a nominal solar panel power up to:

440 W for a 12 V battery system. 880 W for a 24 V battery system. If a higher PV power is connected, the controller will limit the input power to these values.

The SmartSolar MPPT 100/30 controller can accept a maximum open-circuit voltage of 100 V from solar panels.

The SmartSolar MPPT 100/30 controller is designed to support a maximum short-circuit current of solar panels of 35 A. It is important not to exceed this value, as a higher PV short-circuit current could damage the controller.

Yes, you can use an external sensor for battery voltage and temperature. The SmartSolar MPPT 100/30 controller can communicate with a Smart Battery Sense or an intelligent battery monitor BMV-712 via Bluetooth (VE.Smart Networking) to retrieve this data, enabling more accurate charging.

The SmartSolar MPPT 100/30 controller offers several connectivity options:

Built-in Bluetooth Smart: Enables wireless configuration, monitoring, and updates via the VictronConnect app on smartphone or tablet.VE.Direct port: For wired connection to a Color Control GX, other GX products, a PC, or other devices, providing extended monitoring via the Victron Remote Management (VRM) portal if a GX device is used.

The SmartSolar MPPT 100/30 controller has an IP43 protection category for the electronic components and IP22 for the connection area. This means it is protected against solid objects larger than 1 mm and water projections for the electronic components, and against solid objects larger than 12.5 mm and dripping water for the connection area.

The SmartSolar MPPT 100/30 controller’s power terminals are designed to accept cables with a maximum cross-section of 16 mm² (equivalent to AWG6).

Yes, the SmartSolar MPPT 100/30 controller features a dead battery recovery function. It can initiate charging even if the battery has been discharged to zero volts. It can also reconnect to a fully discharged Li-ion battery with an integrated disconnect function.