Odašiljač YB Tracking YB3i fiksni - kabel duljine 10 metara

This cable is designed to connect a Yellow Brick satellite tracking beacon (fixed version) to your boat's electrical system. It provides continuous power to the device and data transmission.

This cable is exactly 10 meters long, providing ample flexibility to relocate the beacon to an unobstructed area while reaching your electrical panel.

This cable is specifically designed for use with Yellow Brick fixed tracking beacons (YB Tracking).

No, this wiring is exclusively intended for the installation of Yellow Brick beacon models designed for permanent mounting on a vessel.

Yes, this cable is specifically designed for harsh marine environments. Its robust jacket resists saltwater exposure, humidity, and weather conditions encountered during offshore sailing.

Yes. The cable design includes UV protection, preventing it from degrading or becoming brittle when exposed to sunlight on your boat's deck or transom.

Using this dedicated cable allows the beacon to be continuously powered from the vessel's electrical panel. This eliminates risks related to battery autonomy and ensures uninterrupted tracking, ideal for long offshore passages.

The 10-meter cable allows you to install the beacon in a completely unobstructed area (such as a gantry, balcony, or mast) to ensure optimal reception of Iridium and GPS signals.

The cable must be routed from the beacon's location to your electrical panel. It is recommended to connect it to a dedicated and protected circuit to ensure stable power supply.

Yes, as with any marine electronic equipment connected to the electrical panel, it is strongly recommended to install a suitable protective fuse on the positive power line of the cable.

No, this cable is designed to both power the beacon and reliably transmit data between the tracking unit and onboard systems.

You can shorten the cable on the electrical panel side if you have marine wiring skills, but it is often better to neatly coil the excess in a dry location to preserve the integrity of the original wiring.

This cable is specifically manufactured and tested for YB Tracking beacons. Its use with other brands is not recommended due to the connectors and wiring specifications unique to each manufacturer.

While installation can be performed by a knowledgeable sailor, it is recommended to hire a marine electrician to ensure watertight cable runs through bulkheads and secure connections to the electrical panel.

This product corresponds to the 10-meter cable only. Mounting accessories such as cable glands or watertight deck plugs must be purchased separately based on your deck configuration.

Yes, this installation cable is perfectly suited to any type of vessel, whether a sailboat or a powerboat, provided it has a shipboard electrical system to power the beacon.

It is recommended to use marine-grade heat-shrink tubing or self-amalgamating tape at electrical connections inside the boat to prevent corrosion caused by salty air.

Yes, this is an original cable from the YB Tracking brand, ensuring perfect compatibility and maximum reliability with your Yellow Brick fixed beacon.

Yes, the cable is designed for good flexibility, making it easier to route through conduits, tubular rails, or bulkheads on your boat during installation.

If the distance between the beacon and the electrical panel exceeds 10 meters, it is advisable to contact a specialist technician to assess the possibility of an extension without voltage drop or data corruption.