Navislim lóðréttur hvítur 2MN - bátur < 20m – Pakki stjórni + stjórni + aftur

The MANTAGUA Navislim vertical kit includes three vertical LED lights:

A red port-side light (112.5° visibility angle)A green starboard light (112.5° visibility angle)A white stern light (135° visibility angle)

Each navigation light included in this kit provides a luminous range of 2 nautical miles (2 NM), which complies with requirements for boats under 20 meters.

Yes, Navislim navigation lights are designed to withstand marine environments. They are made from UV-resistant PC + ASA and have an IP67 waterproof rating, providing protection against temporary immersion and dust.

The electrical consumption is as follows:

1.08 W for each side light (port and starboard) 2.16 W for the stern light These values indicate low energy consumption, minimizing the impact on the vessel's electrical system.

Each Navislim vertical navigation light has compact dimensions of H 38 x W 85 x D 45 mm, allowing discreet integration on the boat's superstructures.

Each MANTAGUA Navislim navigation light weighs 170 grams.

This specific MANTAGUA Navislim vertical navigation light kit is offered with a white finish color.

Yes, the kit is certified RED ENSIGN 76057/XX UK, WHEELMARK 60427/XX MED and ABYC C-5. These certifications confirm compliance with international COLREG 72 regulations for navigation safety.

Each navigation light included in the kit provides a luminous intensity greater than 5.4 candelas (Cd).

Yes, each light comes with 2 meters of cable and 2 M4 screws to facilitate installation.

The 'slim' design of the Navislim lights allows for discreet and harmonious integration on ship superstructures. Their slim profile prevents clutter and fits well with modern designs.

The lights are designed to operate on a 10 to 30 VDC power supply, making them compatible with most boat electrical systems.

This navigation light kit is specifically designed and certified for boats under 20 meters in length.

Yes, with a supply range of 10 to 30 VDC, these lights are compatible with the 12V and 24V electrical systems commonly used on boats.

To comply with COLREG 72 regulations:

The red port-side light must be installed on the left side of the boat. The green starboard light must be installed on the right side of the boat. The white stern light must be installed at the rear of the boat. All lights in this kit are of the vertical type and must be mounted accordingly.

Each light comes with 2 meters of cable and 2 M4 screws, which makes installation easier. However, to ensure installation complies with maritime standards and maintain safety, it is always recommended to consult a professional or strictly follow the mounting instructions.

No, the lights have an IP67 waterproof rating, providing full protection against dust and temporary immersion. Correct installation according to the manufacturer's instructions is sufficient; no additional sealing protection is required.

Yes, the MANTAGUA Navislim navigation light kit is covered by a warranty.

The IP67 rating means the lights are fully protected against dust (first digit '6') and can withstand temporary immersion in water (up to 1 meter for 30 minutes, second digit '7'). This ensures high durability and reliability in a marine environment.

Yes, due to their low power consumption, with only 1.08 W per side light and 2.16 W for the stern light, these LED lights are specifically designed to minimize impact on the vessel's energy consumption and electrical system.