Göng fyrir tengla upp að Ø30 mm, rafmagnsleiðari 9-14 mm – svartur samsetningarplast

The Scanstrut DS30-P-BLK cable gland is a marine accessory designed to ensure watertight passage of cables and their connectors through a boat's deck. It protects connections from water and external elements, ensuring the durability and reliability of your onboard electrical or electronic installation.

This deck gland is designed to accommodate cables with a diameter between 9 and 14 mm (0.35 to 0.55 inches).

The Scanstrut DS30-P-BLK deck gland is suitable for connectors with a maximum diameter of 30 mm (1.18 inches).

The DS30-P-BLK deck gland is made of black composite. This material provides excellent resistance to UV and demanding marine environments.

For installation, you will need the following tools:

A Pozidriv screwdriverA 30 mm (1.18 inch) hole sawA 2.5 mm (3/32 inch) drill bit for soft materials (plywood, etc.) or a 3 mm (1/8 inch) drill bit for hard materials (fiberglass, acrylic, hardwoods)Sealant silicone

Yes, waterproof sealant silicone is required to ensure a fully watertight installation of the deck gland on your boat’s deck, in addition to the supplied gasket.

The kit includes 4 cable gland bungs in different sizes. You must select the bung whose inner diameter is closest to that of your cable to ensure optimal sealing around the cable.

Yes, the bridge panel is made of black composite, a material selected for its high resistance to UV rays and demanding marine environment conditions, ensuring durability and a professional finish.

Yes, the deck gland is designed for simplified installation. It consists of two parts (hull and base) with an integrated sealing gasket, and the provided instructions are clear. Common tools are required, and installation can be performed by someone with basic DIY skills.

The suffix '-P-BLK' indicates that the deck gland is made of black composite (Plastic-Black). Stainless steel versions are typically identified by the suffix '-S'. The composite version offers an excellent weight-to-strength ratio, a discreet finish, and is often preferred for dark decks or for aesthetic reasons, while also providing excellent corrosion resistance.

Yes, this deck gland can be installed on different deck materials, whether soft (such as plywood) or hard (such as fiberglass, acrylic, or hardwood). It is important to use the appropriate diameter drill bit for pilot holes based on your deck material.

This model belongs to the 'vertical' through-hull fitting family, meaning it is primarily designed for cable routing through a horizontal surface such as a boat deck.

Yes, it is recommended to freeze the bung (passage plug) before drilling. This will make the material more rigid and facilitate a clean, precise cut to match your cable’s diameter if none of the supplied bungs fit perfectly.

Yes, the kit includes a sealing gasket which, combined with the application of silicone during installation, ensures a watertight cable passage between the cable gland and the boat's deck.

The deck gland is designed with an integrated sealing gasket in its two-part construction (hull and base), which contributes to overall watertightness. Additionally, a sealing gasket is included in the kit to be positioned between the deck gland and the boat's deck, further enhancing protection against water ingress.

Yes, the DS30-P-BLK is part of the Scanstrut cable gland family, which includes other models such as the DS6, DS16, DS21A, DS21B, and DS40. The DS30 is an intermediate model in the range, with a 30 mm connector pass-through diameter.