Navipro 5MN šoninis tvirtinimas - laivas < 50 m - Stiebas arba vantai (Balta 225°)

The Mantagua Navipro 5MN navigation light provides a regulatory visibility range of 5 nautical miles (5NM). This range exceeds 65 candelas, ensuring reliable long-distance detection.

The Mantagua Navipro 5MN is a masthead navigation light (masthead light), emitting a white light over a 225° arc. It is designed to be mounted on the masthead or mast.

This navigation light is specifically designed for vessels under 50 meters (164 feet). It meets visibility and safety requirements for this category of boats.

The Navipro 5MN is built with UV-resistant, durable materials. It uses 6082-grade aluminum for the base, UV-treated polycarbonate (PC) for the transparent parts, and acrylonitrile styrene acrylate (ASA) for the cover and black components.

The lifespan of the LED light source in the Mantagua Navipro 5MN navigation light is set at 45,000 hours. This ensures long-term reliability and reduces the need for frequent replacements.

After reaching its 45,000-hour lifespan, the navigation light will flash for 10 seconds each time it is turned on. This flashing indicates that the product must be replaced.

The Navipro 5MN navigation light has compact dimensions of Ø 69 mm in diameter and 164 mm in height. Its weight is 230 grams, making installation straightforward.

The Mantagua Navipro 5MN provides a luminous intensity exceeding 65 candelas. This light output ensures excellent visibility and reliable detection at the regulatory range of 5 nautical miles.

The Mantagua Navipro 5MN navigation light is designed for side mounting and can be installed on the masthead or mast. It is important to ensure the location provides clear visibility over the required 225° arc.

Thanks to its optimized power consumption, the Mantagua Navipro 5MN allows the use of thinner diameter cables, which can simplify installation and reduce cable weight.

When assembling and securing the light, the screw torque must not exceed 1 Nm. It is important to tighten gently to avoid damaging the components.

The beacon base must be fixed to a horizontal surface using two M5 screws. These screws are not included with the product and must be provided by the installer.

To ensure watertight installation, apply silicone sealant inside the cable gland cavity after inserting the power cables.

No, the Mantagua Navipro 5MN is designed with electronics that ensure no interference with VHF communication and Automatic Identification System (AIS) devices. It is certified to IEC 60945 standards.

The Mantagua Navipro 5MN is Wheelmark certified 60427/A0 MED and complies with the international COLREGS (1972) and SOLAS (1974) regulations. It also meets the requirements of EN 14744:2005 and IEC 60945 (2002) standards.

The minimum safe distance from a magnetic compass for the Mantagua Navipro 5MN is 15 cm. This ensures the compass operation is not affected by the light.

The Mantagua Navipro 5MN navigation light is covered by a 2-year warranty.