Trispalvis žibintas TYNI Tri 1MN, Mantagua, stiebo galas (mažesniems nei 12 m laivams)

A masthead tricolour navigation light combines the port navigation light (red), starboard navigation light (green), and stern light (white) into a single unit. It is typically installed at the top of the mast and signals the presence and direction of the boat to other vessels, in accordance with collision avoidance rules at sea.

This Mantagua TYNI Tri tricolour navigation light has a luminous range exceeding 1 nautical mile (1 NM). It is specifically designed for vessels under 12 metres in length.

The TYNI Tri tricolour light is suitable for boats under 12 metres in length. Its 1 nautical mile range complies with regulatory requirements for this category of vessels.

The power consumption of this tricolour navigation light is very low, at 1.7 W. This makes it an energy-efficient solution for your onboard electrical system.

This navigation light provides a luminous intensity greater than 1.1 candela, ensuring adequate visibility for its 1 nautical mile range.

Yes, this light is designed to be highly durable. It is fully epoxy-resin encapsulated, making it waterproof with an IP67 rating and effectively protected against vibrations.

Yes, the Mantagua TYNI Tri tricolour light is supplied with a 15-metre power cable, ready to be connected to your onboard electrical system.

This navigation light uses low-power lighting technology. Its design is fully epoxy-resin encapsulated, ensuring high durability and resistance to vibrations.

This tricolour navigation light is designed to operate within a wide temperature range, from -20°C to +50°C, making it suitable for various marine weather conditions.

For mounting, you can use the supplied bracket. At delivery, it is bent at 45°. You can bend it to 90° for top-of-mast mounting or flatten it for side mounting. The light is then secured to the mast with the two supplied stainless steel screws (ø 4 mm), orienting the boat symbol forward.

The light is supplied with the following accessories:

A stainless steel mounting bracketTwo stainless steel screws (ø 4 mm) for installationA 15-metre power cable

It is crucial to orient the light correctly. The boat symbol on the top of the light must face forward on your vessel to ensure proper light signal diffusion and compliance with regulations.

For 12V DC power wire connections, use a cable with a minimum cross-section of 0.5 mm² to ensure optimal and safe operation.

Yes, if you wish, you can choose not to use the stainless steel bracket and glue the light directly at the top of the mast. In this case, it is imperative to ensure the light is oriented toward the bow of the boat.

The light must be assembled on its bracket by hand, without using an electric drill. However, securing the bracket to the mast with the supplied screws may require pre-drilling the mast, depending on the material.

This tricolour navigation light requires a 12V DC power supply to operate correctly. It is also polarity-sensitive.

No, this light is specifically designed for 12V DC power supply. It is not compatible with 24V systems.

This product is manufactured in France, ensuring European craftsmanship and quality standards.