Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 15%

Mastervolt

77031200

Kintamosios srovės analizatorius

The Mastervolt AC Power Analyzer is an essential interface for integrating your alternative power sources (shore power, generator, inverter) into the MasterBus network. It accurately measures voltage, current, frequency, and power factor (Cos Phi) while providing a programmable dry contact and direct compatibility with Mass Sine inverters. Supplied complete with MasterBus cable, terminator, 100:5 current transformer, and user manual.

Public priceGet pro pricing

481,64€

481,64€ ~~566,64€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Mažai liko

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

IP klasifikacija	IP65
Laidinis įėjimas	AC input (via current transformer), MasterBus
Laidinis tinklas	Masterbus
Matmenys (P x A x G)	181 x 80 x 28 mm
Rekomenduojamas baterijos talpos dydis	0.0
Įkrovimo įtampa	0.0
Vėsinimo metodas	Passive
Didžiausias naudingumas	0.0
Išlaikymo įtampa (Float)	0.0
Didžiausia įėjimo srovė (AC)	0.0
Didžiausias įkrovimo srovė (A)	0.0
Minimalus nuolatinės srovės kabelio skerspjūvis	0.0
Montavimo tipas	Wall / Surface
Nominalioji įtampa	0.0
Veikimo temperatūros diapazonas	-20 to +50 °C
Išėjimo įtampa	0.0
Galios koeficientas (Cos Phi)	0.0
Rekomenduojamas saugiklio vardinė vertė	0.0
AC dažnio stebėsena	Yes
AC nominalioji įėjimo įtampa	120 / 230
Maksimali alarminės relės srovė	5
Regimosios galios stebėsena	Yes
Nuolatinė galia 25°C temperatūroje	0.0
Išėjimo nuolatinė galia (40°C)	0.0
Srovės jutiklis įtrauktas	Yes
Srovės transformatoriaus pirminis diapazonas	1 - 250
Srovės transformatoriaus koeficientas	100:5
Srovės transformatoriaus antrinės apvijos diapazonas	1 - 10
Matmenys (imperiniai)	3.1 x 7.1 x 1.1
Energijos stebėsena	Yes
Galvaninė izoliacija	Oui
Generatoriaus galios stebėsena	Yes
Įtraukti priedai	MasterBus cable, MasterBus terminator, 100:5 current transformer, user manual
Inverterio suderinamumas	Mass Sine
Inverterio galios stebėsena	Yes
LED indikatorių detalės	Mode (Yellow), AC ok (Green), AC fail (Red), MasterBus (Green)
Suprojektuota jūrinėms sąlygoms	Oui
MasterBus kabelis įtrauktas	Yes
Suderinama su MasterBus	Yes
MasterBus prievadų skaičius	2
MasterBus energijos poreikis	Yes
MasterBus terminatorius įskaičiuotas	Yes
MasterBus įtampos stebėjimas	Yes
Matuojami parametrai	AC voltage, AC current, frequency, power, power factor
Nominalioji įėjimo įtampa	0.0
Nominalioji išėjimo įtampa	0.0
Veikimo režimai	Quay, Generator, Inverter
Persidėties apsauga	Oui
Viršūninė galia	0.0
Maitinimo šaltinis	MasterBus
Produkto gylis	28
Produkto aukštis	80
Produkto tipas	AC power analyzer
Produkto plotis	181
Relės kontakto tipas	Dry contact (floating potential)
Relės maksimali įtampa	250
Relės išėjimas	Yes
Įtrauktas RJ12 lizdas	Yes
Srovės prijungimo stebėjimas	Yes
Trumpojo jungimo apsauga	Oui
Būsenos LED indikatorių skaičius	4
Svoris	0.53
Svoris (JAV sistema)	1.2
Laidinis išėjimas	Programmable dry contact

Detailed description

Mastervolt kintamosios srovės analizatorius yra daugiafunkcis matavimo prietaisas, skirtas tiksliai stebėti ir matuoti kintamosios srovės srovį, įtampą, dažnį, galios koeficientą (Cos Phi) bei regimają galią jūsų įrenginio sistemoje. Būtinas energijos valdymui laive, jis leidžia prijungti kintamosios srovės įrenginius, tokius kaip elektros generatoriai ar izoliaciniai transformatoriai, prie MasterBus ryšio tinklo.

Išsami analizė ir veikimo režimai

Jungus prie MasterBus tinklo, analizatorius siūlo tris specializuotus veikimo režimus: prieplaukos energija, generatoriaus energija ar keitiklio energija. Priklausomai nuo pasirinkto režimo, jis teikia realiuoju laiku reikalingus duomenis stebėjimui. Srovės matavimas atliekamas netiesioginiu būdu naudojant 100:5 srovės transformatorių, kuris yra tiekiamas komplekte, garantuojant izoliaciją ir optimalų tikslumą. Be to, prietaisas turi programuojamą bevielį kontaktą, galintį perjungti relę (maksimaliai 5A 250V) tam, kad automatizuoti kai kurias jūsų elektros sistemos funkcijas.

MasterBus integracija ir Mass Sine suderinamumas

Šis kompaktiškas (80 x 181 x 28 mm) ir sandarus (IP65) modulis maitinamas tiesiogiai iš MasterBus tinklo ir lengvai montuojamas griežtose jūrinėse aplinkose. Skirtingai nuo bazinių sąsajų, šis analizatorius geba veikti kaip specializuota MasterBus sąsaja Mass Sine keitiklių linijai dėl savo skirtojo RJ12 jungties. Jis sudaro tiltą tarp tradicinių Mastervolt keitiklių ir šiuolaikinės MasterView stebėsenos, užtikrindamas centralizuotą ir nuoseklų laivo energijos valdymą.

Expert review

Pol CONIN

Skaitmeninės veiklos vadovas

« The essential MasterBus interface for AC power monitoring »

The Mastervolt AC power analyzer is a fundamental component for any marine electrical installation requiring fine monitoring of alternative power sources. Its true strength lies in its triple capability: precisely measuring critical parameters (voltage, current, power factor), providing a programmable relay output (5A 250V) for automation, and most importantly, integrating Mass Sine converters into the MasterBus network via its RJ12 port. Supplied with its 100:5 current transformer, it ensures secure indirect measurement. Its IP65 housing confirms its suitability for engine room environments. This is the strategic component for relaying data from a generator or shore power inlet to a MasterView display.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kintamosios srovės analizatorius

481,64€

481,64€ ~~566,64€~~

Frequently asked questions

Need help? Contact us

What is the AC Mastervolt Power Analyzer used for?

The AC power analyzer is a multifunction measuring device designed to monitor your electrical installation. It allows real-time visualization of voltage, current, frequency, power factor (Cos Phi), and apparent power from your AC sources (shore power, generator, or inverter).

Which data does this device measure?

Depending on the selected mode, the device measures and displays AC voltage, AC current, frequency, apparent power (VA), power factor (Cos Phi), MasterBus network voltage, and device temperature.

What are the different operating modes available?

When configuring it on the MasterBus network, you can choose between three operating modes: shore power (Shore), generator power (Generator), or inverter power (Inverter).

How is current measured?

Current is measured indirectly using a current transformer (CT) with a 100:5 ratio. This component is supplied with the analyzer and ensures optimal isolation and accuracy.

Is the AC power analyzer waterproof?

Yes, this module is designed to withstand harsh marine environments. It has an IP65 protection rating, making it fully protected against dust and water jets.

What are the dimensions and weight of the housing?

The analyzer is a very compact module. It measures 80 x 181 x 28 mm (height x width x depth) and weighs only 0.53 kg, making it easy to integrate into tight spaces.

What is included in the box upon purchase?

The device is shipped complete for standard installation. The box contains:

AC power analyzerMasterBus cableMasterBus terminator100:5 current transformerUser manual

Which converters is this analyzer specifically compatible with?

This analyzer stands out for its ability to serve as a MasterBus interface specific to the Mass Sine range of converters from Mastervolt, thanks to its dedicated RJ12 port.

What is the purpose of the integrated potential-free contact (relay)?

The device integrates a programmable dry contact (potential-free) capable of switching a relay with a maximum capacity of 5A at 250V. This allows automation of certain functions in your electrical system, such as automatic start-up of a generator.

How to configure and read analyzer data?

Control and configuration of the analyzer are fully based on the MasterBus network. You will need a compatible display, such as the MasterView Easy panel or MasterView System software, to view measurements and set up the device.

What nominal voltages does the device support?

The AC power analyzer is compatible with standard electrical grids. During initial setup, you can select a nominal voltage of 120V AC or 230V AC.

What do the LED indicators on the device's front panel mean?

The device has several indicators:

Yellow LED (Mode): indicates the relay status.Green LED (AC ok): signals the presence of AC power without errors.Red LED (AC fail): alerts to voltage or frequency out of limits.Green LED (MasterBus): indicates network communication status.

Can I connect a non-MasterBus device directly to the MasterBus network?

Never connect a non-MasterBus device directly to the MasterBus network. To interface third-party equipment with the Mastervolt network, use a dedicated interface such as the Modbus interface.

How to connect the analyzer to the MasterBus network?

The connection is made very simply by using standard UTP patch cables. The analyzer has two MasterBus ports to be daisy-chained with other network devices. Do not forget to install a terminator at both ends of the network.

Is it possible to create ring or T networks with MasterBus?

No, the MasterBus network must be installed as a linear daisy chain. Creating ring networks (loops) or T connections is strictly discouraged as it may disrupt data communication.

Does the current transformer (coil) need to be purchased separately?

No, the current transformer with a 100:5 ratio is included with the AC power analyzer. You do not need to purchase it separately to take current measurements.

What happens if the voltage or frequency exceed the tolerated ranges?

If voltage, current, or frequency values exceed the configured limits, the red "AC fail" LED lights up continuously and an alarm can be triggered on your MasterBus display to alert you to the issue.

Can this analyzer be used to trigger actions on other devices?

Yes, using the MasterBus network event system, you can configure the analyzer to initiate an action on another connected device. For example, it can command a generator to start if shore power becomes insufficient.

What type of cable is used to connect the analyzer to the Mass Sine converter?

To connect the AC power analyzer to a Mass Sine converter, use the dedicated communication port on the analyzer and connect it with a cable equipped with an RJ12 connector.