Cable adaptateur Raymarine A80559 sonde CPT-S/DVS vers Element HV

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Sutaupyta suma: 7%

Raymarine

A80559

Adaptavimo kabelis CPT-S/DVS zondo (9 kontaktų) jungimui prie Element HV (15 kontaktų)

Le câble d'adaptation Raymarine A80559 permet de connecter une sonde CPT-S ou CPT-DVS (9-pin) aux écrans multifonctions Element HV (15-pin), assurant la compatibilité et la réutilisation de vos transducteurs existants. Il offre une solution économique pour les mises à niveau de systèmes de navigation. Le produit inclut uniquement le câble adaptateur.

Public priceGet pro pricing

99,65€

99,65€ ~~108,00€~~

Su PVM Siuntos skaičiuojamos apmokėjimo metu.

Sandėlyje

Free pickup point from 150€ in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Support service

Choose additional assistance for installation

Technical specifications

Jungties tipas	9 broches (sonde CPT-S/DVS) / 15 broches (Element HV)
Kabelio tipas	Câble adaptateur
Derantis tinklas	Sonar CHIRP
Laidinis tinklas	Raymarine Sonar propriétaire
Veikimo įtampa	12V CC
Veikimo temperatūra	-10 à +50°C
Laikymo temperatūra	-20 à +70°C
IP klasifikacija	IPX7
Sertifikatai	CE
Produkto tipas	Câble adaptateur
Derantys modeliai	Sondes Raymarine CPT-S/DVS (9 broches); Écrans multifonctions Raymarine Element HV (15 broches)

Detailed description

Skysat Raymarine A80559 adaptavimo kabelis skirtas užtikrinti suderinamumą tarp tradicinių CHIRP zondų CPT-S/DVS (9 kontaktų jungtis) ir Element HV serijos daugiafunkcių ekranų (15 kontaktų jungtis). Šis techninis sprendimas leidžia naudotojams išsaugoti savo esamus transduserius atnaujinant navigacijos sistemą, optimizuojant materialinį investiciją.

Raymarine sistemų sujungimas ir integracija

Element HV serija, žinoma dėl savo HyperVision sonaro galimybių, naudoja 15 kontaktų zondo jungtis. Tuo tarpu CPT-S ir CPT-DVS zondai, dažniausiai naudojami su senesnėmis Dragonfly serijos ar kitomis Raymarine MFD, turi 9 kontaktų jungtis. A80559 kabelis sujungia šiuos du standartus, leidžiant Element HV ekranams interpretuoti CPT-S/DVS zondų sonaro signalus. CPT-S zondai, įskaitant plastikinius ar bronzinius korpusus (E70339, A80446, E70340, A80447, E70341, A80448, A80545), yra žinomi dėl savo tvirtumo ir jūrinės patikimumo.

Techninis pozicionavimas ir naudotojo privalumas

Šis Raymarine A80559 adaptavimo kabelis yra strategiškai svarbus integracijos komponentas. Jis leidžia išvengti būtinybės keisti dar veikiančius CPT-S/DVS zondus įsigyjant Element HV ekraną, taip mažinant kaštus ir įrengimo sudėtingumą (naujų skylų korpuse gręžimas ar galinės lentynos montavimas). Nors Element HV ekranai optimizuoti HyperVision zondams (neįskaičiuoti), CPT-S/DVS zondo naudojimas per šį kabelį užtikrina patikimą tradicinio CHIRP sonaro veikimą. Šis požiūris skiriasi nuo pilno Element HV + HyperVision zondo sprendimo, siūlant progresyvesnį ir ekonomiškesnį atnaujinimo būdą, ypač tinkamą jachtininkams, norintiems išsaugoti dalį esamos įrangos, tuo pačiu naudojantis naujos kartos displėjaus platformų privalumais.

Documentation

Type	Nom
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)

Expert review

Pol CONIN

Skaitmeninės veiklos vadovas

« Integration of CPT-S/DVS transducers with Raymarine Element HV displays »

The Raymarine A80559 adapter cable is a practical solution for recreational boaters considering an upgrade to the Element HV series while retaining their existing CPT-S or CPT-DVS transducer. Its purpose is to allow reuse of an expensive and often complex component to replace, such as a through-hull transducer, thus avoiding additional hull work. It primarily targets boat owners with Raymarine transducers from previous generations who do not wish to immediately invest in a new HyperVision probe.

Installing this cable is straightforward: it is a plug-and-play connection between the 9-pin connector of the CPT-S/DVS transducer and the 15-pin port of the Element HV display. This significantly simplifies integration and reduces vessel downtime. This approach differs from a complete solution with a dedicated HyperVision probe by offering a cost-effective alternative. It is particularly relevant if the sonar capabilities of the CPT-S/DVS transducer are deemed sufficient for the user's primary needs, or if the budget does not allow for a full replacement.

It is crucial to understand the limitations of this adapter: it ensures physical and electrical compatibility but does not convert a CPT-S transducer into a HyperVision probe. To fully utilize the 1.2 MHz frequencies and the ultra-high-resolution imaging performance of HyperVision, a dedicated probe for this technology is essential. The A80559 cable is therefore a functional gateway to traditional CHIRP technology, serving as a transitional solution or a useful complement rather than a replacement for the native capabilities of Element HV probes.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Adaptavimo kabelis CPT-S/DVS zondo (9 kontaktų) jungimui prie Element HV (15 kontaktų)

99,65€

99,65€ ~~108,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A80559 adapter cable used for?

The Raymarine A80559 adapter cable is designed to connect legacy CHIRP transducers of the CPT-S and CPT-DVS types (equipped with a 9-pin connector) to Element HV series multifunction displays (which use a 15-pin connector). It allows you to reuse your existing transducer when upgrading your navigation system.

Which Raymarine transducers are compatible with this A80559 cable?

This cable is compatible with Raymarine transducers equipped with a 9-pin connector, specifically models in the CPT-S series (for traditional CHIRP sonar) and CPT-DVS series (for DownVision and SideVision sonar). This includes transducers such as the CPT-100, CPT-110, CPT-120, as well as CPT-S models with references E70339, A80446, E70340, A80447, E70341, A80448, and A80545.

Which Raymarine multifunction displays is this cable compatible with?

The A80559 adapter cable is specifically designed for use with Raymarine Element HV series multifunction displays, which feature a 15-pin transducer connector.

Does this cable allow me to use the HyperVision features with my CPT-S/DVS transducer?

No, this adapter cable allows your Element HV display to use the standard CHIRP sonar signals from your CPT-S transducer or the DownVision/SideVision signals from your CPT-DVS transducer. The advanced HyperVision features on Element HV displays require the use of HyperVision-specific transducers, which are not included with this cable and are not supported by CPT-S/DVS transducers.

Is it difficult to install the A80559 adapter cable?

The A80559 adapter cable is designed for a simple and direct plug-and-play connection between your existing transducer and your new Element HV display. Simply connect the 9-pin end to your CPT-S/DVS transducer and the 15-pin end to your Element HV display. The cable itself does not require any specific tools for installation, but accessing the transducer and display connectors may vary depending on your boat's setup.

What is the advantage of using this adapter cable instead of buying a new depth sounder?

The main advantage of this cable is that it allows you to keep and reuse your existing Raymarine CPT-S or CPT-DVS depth sounder when purchasing an Element HV display. This represents significant savings by avoiding the purchase of a new depth sounder and simplifies installation by eliminating the need to drill new holes in the hull or modify the transom mount for a new depth sounder.

Is this cable compatible with CPT-DV transducers or older DownVision/SideVision transducers (CPT-100/110/120)?

Yes, this cable is compatible with Raymarine CPT-DV transducers and older DownVision/SideVision transducers such as the CPT-100, CPT-110, and CPT-120. All these transducers use a 9-pin connector, making them adaptable to Element HV displays (15-pin) via cable A80559.