Adaptavimo plokštė AXIOM 9 PRO E90W įrėžimui

This mounting plate, part number A80530, is specifically designed for installing a Raymarine Axiom 9 Pro multifunction display (MFD).

It is designed to be installed in an existing cutout that was originally intended for a Raymarine E90W display.

No, the A80530 mounting plate is specifically sized for the Raymarine Axiom 9 Pro display. It is not compatible with other screen sizes in the Axiom range.

No, this mounting plate is specifically designed to upgrade a Raymarine E90W display installation to an Axiom 9 Pro. It is not compatible with the older E-Series Classic or C-Series models.

No, this plate is designed for a direct transition from Raymarine E90W to the Axiom 9 Pro. It is not intended for adapting to cutouts of displays from other brands.

The A80530 mounting bracket is designed to fit Raymarine Axiom 9 Pro displays in general, with no distinction between specific versions mentioned in the provided information.

The main advantage is to simplify upgrading your navigation system. It allows installation of an Axiom 9 Pro display in an existing cutout for an E90W, avoiding costly and complex modifications to the dashboard or navigation console.

The overall dimensions of the A80530 mounting plate are 316.4 mm in width and 196.5 mm in height.

The internal cutout for the Axiom 9 Pro display measures 282.4 mm in width and 160.0 mm in height.

Yes, this plate is specifically designed to allow flush installation of the Axiom 9 Pro display, ensuring an aesthetic and integrated finish on the dashboard.

Yes, the A80530 adapter plate is an official Raymarine accessory, designed to integrate seamlessly with their equipment.

No, reference A80530 corresponds solely to the mounting bracket. The Raymarine Axiom 9 Pro display must be purchased separately.

No, one of the main advantages of this plate is that it is designed to avoid costly and complex modifications to the dashboard by using the existing cutout of the Raymarine E90W.

The mounting plate's attachment points are precisely aligned to match the specifications of the E90W and Axiom 9 Pro displays, ensuring secure installation and a perfect fit. It uses the existing cutout.

No, a full recut is not required. The A80530 plate is specifically designed to fit into the existing cutout of the E90W display, making the upgrade straightforward.

The A80530 adapter plate provides adequate coverage of the E90W's original cutout and allows the Axiom 9 Pro to be installed flush-mounted, resulting in a clean and aesthetic finish at the helm.

Yes, by avoiding the need for new cutouts or additional carpentry work, the mounting plate helps maintain the structural integrity of the existing dashboard panel.

Yes, the mounting points are precisely aligned and pre-drilled on the plate to match the specifications of the E90W and Axiom 9 Pro displays, ensuring secure installation.

The plate is designed for secure integration. The final waterproofing of the assembly will depend on the correct installation of the Axiom 9 Pro display itself with its own seals and adherence to the manufacturer's mounting instructions.