Cyclone ta Quantum 10M

This 10-meter data cable is designed to interconnect Raymarine Cyclone and Quantum radar systems. It ensures radar data transmission and direct connection between the radar unit and the vessel's RayNet network, or via a Voltage Converter Module (VCM100).

The RAYMARINE Cyclone to Quantum cable is 10 meters long.

This cable is specifically designed for Raymarine Cyclone and Quantum radars.

Yes, this cable is designed to ensure native compatibility with compatible LightHouse multifunction displays (MFD), enabling full use of the radar's capabilities.

Yes, this cable enables full use of the radar's capabilities, including Doppler data for hazardous target identification and ARPA functions for automatic tracking, subject to the multifunction display's software requirements.

The cable provides a direct link between the radar unit and the onboard RayNet network. It can also connect via a voltage converter module (VCM100) for power and data management.

The cable can connect directly to the RayNet network. However, it can also be used via a voltage converter module (VCM100) for power and data management, depending on your radar system configuration. The VCM100 is a separate accessory.

Rigorous cable routing management is essential. You must respect bend radii and mechanical protections to maintain signal integrity over time and ensure radar data reliability.

Yes, the RAYMARINE Cyclone to Quantum 10M data cable meets the shielding and insulation standards required to minimize electromagnetic interference, a critical factor in the marine environment.

Raymarine's general cabling guide recommends using ferrite chokes to minimize interference. It is advised to check the specific installation manual for your Cyclone or Quantum radar to confirm this requirement.

Yes, this proprietary Raymarine cable is designed specifically for Cyclone and Quantum radars, ensuring native compatibility.

To ensure durability and reliability of the system, cables must be protected against physical damage, abrasion, and excessive stress. It is important to respect minimum bend radii during installation.

The 10-meter length is a standard suitable for many installation configurations. Other RayNet cable lengths are available from Raymarine to accommodate specific needs for longer runs or more complex routing.

Yes, the cable is specifically engineered to ensure seamless integration and optimal performance within Raymarine navigation architectures, meeting the shielding and insulation standards required for marine environments.

The safe distance from compasses does not apply to the cable itself, but to the radar unit (the Cyclone/Quantum pedestal). It is imperative to refer to the radar's installation manual for the specific safe distances to be respected relative to magnetic compasses.

To maintain signal integrity over time, it is crucial to carefully manage cable routing, respecting bend radii and mechanical protections. Cable shielding is also essential to minimize interference.

No, the RAYMARINE Cyclone to Quantum 10M cable (A80657) is sold separately. The VCM100 voltage converter module (reference E70648) is a separate accessory that may be required for certain Cyclone or Quantum radar installations.

Yes, the cable is designed to transfer the data required for ARPA functions, provided the LightHouse multifunction display (MFD) has the required software version to operate ARPA.

Raymarine products, including this cable, are typically covered by the manufacturer's standard warranty policy. For detailed warranty information and registration procedures, please consult Raymarine's official website.

Yes, the RAYMARINE Cyclone ta Quantum 10M data cable is specifically designed to ensure seamless integration and optimal performance within Raymarine navigation architectures based on RayNet.