Plastikinė 0° pralaidžioji zondinė antena HV-300 HyperVision (6 m kabelis)

This transducer is a through-hull plastic model, specifically designed for flat hulls or those with a 0° deadrise angle. This means it is optimized for installation without an angle compensation block on hulls that do not require correction.

The HV-300 uses Raymarine's HyperVision™ imaging technology. This technology is known for its high-resolution imaging capabilities, providing detailed views of the seabed and submerged structures, which is essential for fishing and navigating in complex areas.

This transducer is compatible with Raymarine multifunction displays that support HyperVision™ technology. For optimal compatibility, ensure your display supports this specific technology.

For the installation of the through-hull HV-300 depth sounder, you must use only marine-grade polyurethane-based sealants. It is essential not to use acetate or silicone-based products, as they can damage the plastic components of the depth sounder.

No, you must only apply water-based antifouling paints to the transducer. Do not use ketone-based or copper-based paints, as this could affect the transducer's performance and void the product warranty.

No, it is mandatory to test and use the depth sounder only when it is submerged in water. Operating it out of the water may cause overheating of the transducer and potentially damage the product.

The 0° through-hull plastic transducer HV-300 HyperVision comes with an integrated 6-metre cable. This length is designed to facilitate connection to your onboard electronics system.

Compared to a transom-mount transducer (such as the HV-100), the through-hull transducer HV-300 delivers better performance, particularly at high speeds, and reduces turbulence. Its direct positioning in the water flow beneath the hull provides more stable and accurate readings, which is critical for high-quality sonar imaging.