Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 17%

Blue Sea Systems

7504-BSS

Tīkla pārveidotājs Deckhand - 24 V līdzstrāva 6 A

Q: What is the BLUE SEA Deckhand 7504-BSS dimmer?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: Which types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS variable speed drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current this drive can handle?

The Deckhand 7504-BSS drive can deliver a maximum output current of 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and progressive variation in light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the illuminated output with delay function?

To activate the illuminated output function:For a 1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash, and the lights will remain on for 1 minute.For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the drive stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch down until the circuit flashes to reset it.

Q: Does the dimmer save the last brightness setting?

Yes, the Deckhand dimmer features a memory function that stores the last used light intensity setting.

Q: What is the operating temperature range of this drive?

The drive is designed to operate across a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Spriegums: 24 V

12 V 24 V

Strāva: 6 A

6 A 12 A

Public priceGet pro pricing

102,30€

102,30€ ~~124,32€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Vadības interfeisa tips	Interrupteur momentané (ON)-OFF-(ON)
Vadības tips	Modulation de largeur d'impulsion (PWM)
Saderināmas apgaismojuma sistēmas	LED non régulées, incandescentes, halogènes
Zone Control	Non
Strāvas sprieguma darbības diapazons	18 à 32
Tipisks elektriskais patēriņš	<0.048
Uzstādīšanas veids	Montage sur panneau
Produkta izmēri	82.55 x 88.9 x 50.8 mm
Dimmēšana atbalstīta	Oui
Komplekta saturs	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Produkta svītrkods	SK-000051475
Sertifikāti	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Maksimālā izejas strāva	6 A
Nominālais spriegums	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Darba temperatūras diapazons	−40°C à 85°C
Produkta SKU	7504-BSS
Produkta tips	Variateur d'intensité

Detailed description

Izstrādāts, lai optimizētu apgaismojumu uz kuģa, BLUE SEA Deckhand 7504-BSS tīkla pārveidotājs ir digitāla intensitātes kontroles risinājums 24 V līdzstrāvas sistēmām. Tas ļauj pārvaldīt neregulētas LED, kvēlspuldzes un halogēniedarbinātājus. Tā izgaismota izejas funkcija piedāvā pielāgojamu aizkavējumu drošībai iekāpšanas un izkāpšanas laikā, ar iespējām no 1 līdz 5 minūtēm. Pārveidotājs atbalsta vairākus slēdžu novietojumus un integrē atmiņu pēdējai intensitātes iestatījumam.

Funkcijas un veiktspēja

Iekļautā "bulb saver" pagarina kvēlspuldzes dzīves ilgumu, lādējot kuģa baterijas. Novietojuma valnītes atvieglo vairāku pārveidotāju blakus uzstādīšanu, optimizējot elektrisko tablo vietu. Ierīcei ir integrēta pārsprieguma aizsardzība, sistēmu var atiestatīt, nospiežot pārveidotāja slēdzi līdz brīdim, kad ķēde mirgo.

Tehniskās specifikācijas un atbilstība

Darbojas ar nominālo spriegumu 24 V līdzstrāva, darbības diapazonā no 18 V līdz 32 V, Deckhand 7504 nodrošina maksimālo izejas strāvu 6 A. Tā patērē mazāk par 2 mA, darbojas plašā temperatūras diapazonā no −40°C līdz 85°C. Gaismas intensitātes kontrole tiek veikta ar impulsu platuma modulāciju (PWM), nodrošinot gludu pārmaiņu. Izstrādājums atbilst standartiem E, ISO 8846 un SAE J1171 pret ārējo aizdegšanos, apliecinot tā uzticamību jūras vidē.

Pozicionēšana BLUE SEA sortimentā

BLUE SEA Deckhand sortimentā šis modelis 7504 ir 24 V līdzstrāvas 6 A standarta risinājums. Tas papildina 12 V līdzstrāvas versijas, kā 7506 (6 A), 7507 (12 A) un 7508 (25 A), kā arī citus 24 V līdzstrāvas modeļus ar lielāku jaudu, piemēram, 7509 (12 A). Šis pārveidotājs ir paredzēts, lai aizstātu iepriekšējos modeļus, kā 7501 vai 7502, piedāvājot uzlabotu jaudu un funkcionalitāti 24 V sistēmām.

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Payment and security

Your payment information and data are processed securely.

Tīkla pārveidotājs Deckhand - 24 V līdzstrāva 6 A

102,30€

102,30€ ~~124,32€~~

Frequently asked questions

Need help? Contact us

What is the BLUE SEA Deckhand 7504-BSS dimmer?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Which types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS variable speed drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current this drive can handle?

The Deckhand 7504-BSS drive can deliver a maximum output current of 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and progressive variation in light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the illuminated output with delay function?

To activate the illuminated output function:

For a 1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash, and the lights will remain on for 1 minute.

For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the drive stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch down until the circuit flashes to reset it.

Does the dimmer save the last brightness setting?

Yes, the Deckhand dimmer features a memory function that stores the last used light intensity setting.

What is the operating temperature range of this drive?

The drive is designed to operate across a wide temperature range, from -40°C to 85°C.

What is the energy consumption of the autopilot in standby mode (parasitic load)?

The Deckhand autopilot's maximum parasitic load is less than 2 mA.

Is it possible to use this inverter with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points on board.

How do offset mounting tabs facilitate installation?

The offset mounting tabs allow multiple drives to be installed side by side in a compact arrangement, optimizing the available space on the electrical panel.

Which type of switch is included with the Deckhand 7504-BSS dimmer?

The dimmer is supplied with a momentary (ON)-OFF-(ON) switch (PN 8216 reference).

How to connect the inverter to the boat's electrical system?

The dimmer is connected as follows:

The red wire connects to the +24V DC power supply.The two black wires connect to ground (negative bus bar).The blue wire connects to the lamp.The grey and white wires are the inputs for the switch (Down Input and Up Input).A fuse must be installed on the +24V DC line before the dimmer.

What are the dimensions of the Deckhand 7504-BSS autopilot drive?

The Deckhand 7504-BSS autopilot drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS variable frequency drive compliant with marine standards?

Yes, this variable frequency drive is E-marked and complies with the external ignition protection requirements of ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer with LEDs that already have an integrated driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LEDs, as well as incandescent and halogen bulbs. Using it with already regulated LEDs may not work correctly or could damage the dimmer or the lights.