NMEA 2000 atzaro kabelis, 3 m

An NMEA 2000 drop cable is used to connect an individual device (such as a sensor, display, or navigation equipment) to the main NMEA 2000 backbone. It enables data and power transmission to that device.

This CZone extension cable is 3 metres long.

This cable is fitted with standard "Micro C" connectors, which are made of metal to ensure durability and a reliable connection.

Yes, this CZone NMEA 2000 extension cable has an IP68 waterproof rating, making it fully suitable for harsh marine environments.

Yes, thanks to its NMEA 2000 certification, this cable ensures universal compatibility with all certified NMEA 2000 equipment and devices, regardless of brand.

Yes, the NMEA 2000 drop cable is designed to simultaneously transmit navigation data and electrical power to connected devices.

A backbone cable forms the main backbone of the NMEA 2000 network, to which all devices are connected. A drop cable, like this one, is a shorter and more flexible cable that connects an individual device to the backbone via a T-connector.

The NMEA 2000 specification allows a maximum length of 6 meters for a single drop cable. This 3-meter cable is therefore compliant with this standard.

Yes, absolutely. The NMEA 2000 standard is designed for interoperability. As long as the devices are NMEA 2000 certified and use Micro C connectors, this cable will be compatible.

In a CZone system, this branch cable integrates standalone components into the digital network. It simplifies complex wiring and enables centralized control and monitoring of the boat's or recreational vehicle's equipment.

Yes, Micro C connectors are the most common standard for NMEA 2000 networks on boats, ensuring broad compatibility with most marine equipment.

It is not recommended to extend an NMEA 2000 drop cable by cutting and splicing it, as this may compromise signal integrity and waterproofing. It is preferable to use a cable of the appropriate length or add another connection point to the backbone if necessary.

Yes, NMEA 2000 drop cables are designed to be more flexible and have a reduced diameter compared to backbone cables, making them easier to route and install in tight spaces.

This drop cable must be connected to a T-connector that is itself connected to the backbone of your NMEA 2000 network. The device you wish to connect is then plugged into the other end of the drop cable.

No, NMEA 2000 and NMEA 0183 are different communication standards and are not directly compatible with each other. This cable is specifically designed for NMEA 2000 networks.

Yes, metal connectors provide increased durability and better resistance to harsh environments, such as those encountered at sea. They also contribute to a more robust and reliable connection.

No, this cable is designed to work only with NMEA 2000 certified devices. Connecting a non-certified device could cause communication issues or damage the network.

No, a NMEA 2000 drop cable is designed to connect a single device to the backbone. To connect multiple devices, each device must have its own drop cable connected to a separate T-connector on the backbone.

NMEA 2000 "Micro C" connectors are designed to be watertight when properly screwed and tightened. Ensure the O-rings are in place and undamaged, and hand-tighten the locking rings to guarantee a secure and watertight connection.

The NMEA 2000 network is typically powered at 12V DC. The cable is designed to transmit both power and data. It is compatible with the boat’s electrical systems, whether 12V or 24V, provided the NMEA 2000 network’s own power supply meets specifications (usually 12V).