Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 20%

CZone

80-911-0013-00

CZone SI signāla interfeiss

The CZone SI (80-911-0013-00) signal interface integrates 6 universal inputs (0-34V DC, 0-1000 Ohms) into the NMEA 2000 network for smart automation and monitoring. This IPX5 module is compatible with tank level sensors, switches, and voltage or resistive signals. It is supplied with the main module.

Public priceGet pro pricing

287,82€

287,82€ ~~362,16€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Zems krājums

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Produkta pielietojums	L'interface de signal CZone SI connecte le système CZone à des capteurs externes, des alarmes et des dispositifs de commutation, permettant un fonctionnement intelligent et automatisé des circuits en fonction de l'état de l'entrée.
Komunikācijas protokols	NMEA 2000
Ieeju skaits	6.0
Izeju skaits	0.0
Vadu ieeja	Connecteur NMEA 2000
Vadu izeja	Connecteur NMEA 2000
Konektora tips	Connecteur NMEA 2000
Saderīgs ar MasterBus	Non
Saderīgs ar CZone	Oui
Saderināms ar NMEA 2000	Oui
Strāvas sprieguma darbības diapazons	9-16 V DC
Montāžas tips	Montage en surface
IP indekss	IPX5
Izmēri (G x A x D)	100 x 156 x 42 mm
Svars	0.281
Alarm Trigger Conditions	Interrupteur de niveau d'eau élevé
Analogās ieejas pretestības diapazons	0-1000
Analogās ieejas sprieguma diapazons	0-34
Analog Input Voltage Range Precise	0-5
Produkta svītrkods	80-911-0013-00
Sertifikāti	CE, RCM, NMEA 2000
Saderināmo ierīču sērijas	Tous appareils NMEA 2000
Data Transmission Category	Fluide, Température, Pression
Pārraidītie dati	Informations de fluide, de température et de pression
Digital Input Voltage Range	0-35
Korpusa materiāls	Polycarbonate, ABS
Input Configurability	Oui
Input Signal Type	Interrupteurs (négatif, circuit ouvert, 0-35V DC), sondes de niveau de réservoir (0-5V, 10-180 Ohms, 240-33 Ohms), signaux voltaïques ou résistifs
Input Terminal Type	Bornier à vis
Instalācijas vide	Marin
Saskarnes tips	Interface de signal
Led Status Indication	Oui
Saderība ar MFD	Tous appareils NMEA 2000
Operating Temperature Range C	-20°C à +55°C
Pārsprieguma aizsardzība	Oui
Iepakojuma svars	0.363
Tipisks elektriskais patēriņš (mA)	100
Barošanas avots	Alimentation via réseau NMEA 2000
Produkta kategorija (līmenis 0)	Marchandise
Produkta kategorija (līmenis 1)	NAVICO GROUP
Produkta kategorija (līmenis 2)	04 - CZone (40)
Produkta loma	Intégration de capteurs et interrupteurs externes
Produkta līnija	CZone
Produkta tips	Module d'interface de signal
Produkta tilpums (cm³)	655.2
Storage Temperature Range C	-40°C à +85°C
System Automation Functions	Gestion centralisée et automatisée des circuits
Atbalstītie degvielas tvertņu tipi	Sondes de niveau de réservoir standard (0-5V, 10-180 Ohms, 240-33 Ohms)
Vendor	CZONE
Vadu tīkls	NMEA 2000

Detailed description

CZone SI (80-911-0013-00) signāla interfeiss ir centrālais elements ārējo sensoru un slēdžu integrēšanai CZone digitālajā komutācijas un monitoringa sistēmā. Izstrādāts, lai paplašinātu NMEA 2000 tīkla iespējas, tas nodrošina centralizētu un automatizētu kontroli pār dažādām ievaddatiem.

Savienojamība un ievades daudzveidība

Šis modulis ir aprīkots ar 6 konfigurējamām ievadēm, kas nodrošina elastību dažādām jūras pielietojumiem. Tas uztver signālus no tradicionāliem slēdžiem (negatīvs, atvērts kontakts, 0-35V līdzstrāva) kontroles izejām, kā arī trauksmes signālus, piemēram, augsta ūdens līmeņa slēdzi. Interfeiss atbalsta arī standarta degvielas līmeņa sensorus (0-5V, 10-180 Ω, 240-33 Ω) un vispārīgus voltaiskos vai resistīvos signālus. Konkrētas ievades diapazoni ir 0 līdz 1000 Ω resistīviem signāliem un 0 līdz 34 V līdzstrāvas signāliem. Katra ievade ir aprīkota ar LED statusa indikatoru, kas atvieglo monitoringu. Šī daudzveidība atšķir to no pamata ievades/izvades moduļiem, kas apstrādā tikai vienu signāla tipu, padarot SI interfeisu par datu agregācijas risinājumu CZone sistēmai.

Integrācija un tehniskie parametri

CZone SI signāla interfeiss integrējas NMEA 2000 tīklā, nodrošinot standartizētu datu pārraidi, piemēram, šķidruma, temperatūras un spiediena informāciju uz daudzfunkcionāliem ekrāniem un citiem savietojamiem ierīcēm. Tā izmēri ir 100 x 156 x 42 mm, svars — 281 g. Ar IPX5 iespējamo īslaicīgu iegremdēšanas aizsardzību tas ir piemērots jūras vides pielietojumiem. Modulis atbilst elektromagnētiskās savietojamības standartiem IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1 un ISO 7637-2, garantējot elektromagnētisko savietojamību un izturību pret elektriskajām traucējumiem. Tas ideāli papildina esošās CZone sistēmas, piemēram, Touch 10 ekrānus vai kombinētos moduļus, kalpojot kā vārteja ārējiem sensoriem, kas nav NMEA 2000.

Documentation

Type	Nom
	_tchdat_bep1_pdf.pdf
	czone_signal_interface_user_installation_manual_v2.pdf

Expert review

Pol CONIN

Digital Manager

« The CZone SI interface: the analog-to-digital bridge for your NMEA 2000 network »

The CZone SI signal interface is a strategic component for any CZone installation seeking to integrate analog or passive sensors and switches into an NMEA 2000 environment. Its primary role is to digitize these signals for use by the CZone system, enabling centralized automation and monitoring.

This module is particularly relevant for retrofits or custom installations where existing equipment (tank float switches, bilge pump switches, hatch position sensors, manual navigation lights) must be connected to the digital network. It eliminates the complexity and cumbersome wiring of traditional analog systems by providing a single interface for 6 inputs. Integrating this interface greatly simplifies wiring topology and alarm management.

It is essential to plan the module's location to optimize sensor cable lengths and ensure the NMEA 2000 network is properly sized to accommodate it. While IPX5 offers good splash protection, it is recommended to install it in a dry compartment or under a deck to maximize its lifespan. This module is a wise choice for integrators looking to provide their clients with a unified and intelligent management solution for onboard equipment, fully leveraging the capabilities of the CZone system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

CZone SI signāla interfeiss

287,82€

287,82€ ~~362,16€~~

Complete your installation with

Complementary equipment

Skārda pieskāriena ekrāna komplekts 10 Gen 2

CZone

Skārda pieskāriena ekrāna komplekts 10 Gen 2

Ref : 80-911-0216-00

3.739,76€

3.739,76€ ~~3.990,85€~~

CZone

7" pieskāriena ekrāna komplekts

Ref : 80-911-0200-00

1.363,96€

1.363,96€ ~~1.537,37€~~

CZone

Ūdensnecaurējams 6 kanālu (ainava) slēdzklaviers

Ref : 80-911-0162-00

326,08€

326,08€ ~~387,48€~~

CZone

Hermetisks 6-vietu tastatūra (portreta režīmā)

Ref : 80-911-0163-00

290,62€

290,62€ ~~387,48€~~

CZone

WiFi MasterBus pieslēguma bloks

Ref : 80-911-0095-00

81,13€

81,13€ ~~106,68€~~

Kit de télécommande sans fil pour interrupteurs de batterie de taille 701-MD et 720

CZone

Bezvadu tālvadības komplekts bezvadu slēdžu baterijām modeļiem 701-MD un 720

Ref : 80-911-0045-00

167,06€

167,06€ ~~198,24€~~

Frequently asked questions

Need help? Contact us

What is the CZone SI signal interface?

The CZone SI signal interface (reference 80-911-0013-00) is a central module designed to integrate external sensors and switches into a CZone digital switching and monitoring system. It extends the capabilities of the NMEA 2000 network for centralized and automated management of circuits from various inputs.

How many configurable inputs does the CZone SI interface have?

The CZone SI signal interface is equipped with 6 configurable inputs, providing high flexibility for various marine applications.

What types of signals can the CZone SI signal interface accept?

This module is versatile and can accept several types of signals:

Traditional switch signals (negative, open circuit, 0-35V DC) for output control.Alarm triggers, such as a high water level switch.Standard industry tank level probes (0-5V, 10-180 Ohms, 240-33 Ohms).General voltaic or resistive signals.

What are the specific input ranges for resistive and voltage signals?

The specific input ranges for the CZone SI interface are:

0 to 1000 Ohms for resistive signals.0 to 34 V DC for voltage signals.

Does the CZone SI interface have status indicators for its inputs?

Yes, each input on the CZone SI signal interface is equipped with an LED status indicator, which makes monitoring and diagnostics easier.

What are the physical dimensions of the CZone SI signal interface?

The physical dimensions of the CZone SI signal interface are 100 x 156 x 42 mm.

What is the weight of the CZone SI signal interface?

The weight of the CZone SI signal interface is 281 grams (0.281 kg).

What is the water protection rating of the CZone SI interface?

The CZone SI signal interface has temporary immersion protection with an IPX5 waterproof rating.

How does the CZone SI interface connect to the boat's system?

The CZone SI signal interface integrates into the NMEA 2000 network, enabling standardized communication with other compatible devices in the boat's system.

Is the CZone SI signal interface compatible with multifunction displays (MFD)?

Yes, thanks to its integration into the NMEA 2000 network, the CZone SI interface enables the transmission of standardized data to multifunction displays (MFD) and other compatible devices.

Which tank level sensor types are supported by the CZone SI interface?

The CZone SI interface supports standard industry tank level sensors with signal ranges of 0-5V, 10-180 Ohms, and 240-33 Ohms.

Can the CZone SI interface be used to trigger alarms?

Yes, the CZone SI interface can be configured to accept alarm triggers, such as those from a high water level switch, enabling proactive monitoring.

What is the role of the CZone SI signal interface in a larger CZone system?

In a CZone system, the SI interface acts as a data aggregation solution. It collects information from various sensors and switches, then integrates it into the NMEA 2000 network for centralized management and monitoring.

What types of data does the CZone SI interface transmit on the NMEA 2000 network?

The CZone SI interface transmits standardized data such as fluid levels, temperature, and pressure over the NMEA 2000 network.

Is the installation of the CZone SI signal interface complex?

The CZone SI signal interface is designed for seamless integration into an existing CZone system via the NMEA 2000 network. For optimal installation and configuration of inputs, it is recommended to follow the manufacturer's detailed instructions or consult a professional.

What is the reference number (SKU) of this product?

The reference number (SKU) for the CZone SI signal interface is 80-911-0013-00.

Is the CZone SI interface designed specifically for a marine environment?

Yes, as a CZone product, this interface is specifically designed for marine applications, as evidenced by its IPX5 waterproof rating and its ability to integrate with NMEA 2000 networks.