HOOK2 & Hook Reveal Ledus zonde 200 kHz

This transducer is an accessory designed to extend the capabilities of your Lowrance HOOK2 and Hook Reveal combos for ice fishing. It allows you to use the fishfinder functions of your device to precisely detect fish and structures under the ice.

This transducer operates at a frequency of 200 kHz. This frequency is optimized for water column detection, particularly suited to ice-fishing conditions.

While technically possible, this depth sounder is specifically designed and optimized for ice fishing. For open-water fishing, it is generally recommended to use a transom-mount or thru-hull transducer suited for this purpose to achieve optimal performance.

Unlike dedicated flashers such as Vexilar or Marcum, this transducer allows Lowrance users to convert their existing HOOK2 or Hook Reveal multifunction display into an effective ice fishing tool. It provides a cost-effective solution by using your current equipment, without requiring the purchase of a full dedicated ice-only unit.

No, this transducer is designed to integrate directly with HOOK2 and Hook Reveal systems. It features the correct connector for these device series.

To clean the sensor housing, use hot water with a drop of dish soap or mild detergent.

The shallow-water alert function, when used with this depth sounder and a HOOK2 or Hook Reveal device, can be set for a range from 0 m to 3 m.

No, this transducer operates at 200 kHz, which is dedicated to traditional 2D sonar. DownScan and SideScan (StructureScan) features use different frequencies, typically 455 kHz or 800 kHz, and require specific transducers designed for these technologies.

The product is the ice transducer itself. The available information does not specify whether a specific ice mounting bracket is included. It is recommended to check the exact contents of the package or recommended accessories separately.

Yes, this transducer is specifically designed for winter use and ice fishing, ensuring reliable and stable readings even in cold conditions.

The reference number (SKU) of this depth sounder is 000-14089-001.

No, the transducer is powered and communicates via the connection cable to your Lowrance HOOK2 or Hook Reveal display, which supplies the necessary power.

Yes, this equipment complies with CE marking under Directive 2014/53/EU.

Yes, the transducer allows your HOOK2 or Hook Reveal device to capture sonar data. You can then adjust the sensitivity settings directly on your display’s interface to optimize detection based on fishing conditions.

For optimal detection, the transducer must be submerged in water under the ice, ideally in a drilled hole, and positioned stably to avoid interference and ensure a clear reading of the bottom and fish.

Unlike standard transom or thru-hull transducers, this ice fishing transducer is specifically designed to withstand cold temperatures and the rigors of winter fishing. Its 200 kHz frequency is optimized for precise vertical detection in the water column beneath the ice, ensuring stable and reliable readings of fish and structures.