Komutācijas panelis 3 pozīcijas 24V 10A

The RULE RL044 control panel is designed for bilge pump management. It provides precise and secure control of your marine pumping system.

The RL044 control panel has three distinct operating modes:

AUTO (Automatic): The pump starts automatically, typically via a float switch.OFF (Stop): The pump is disabled and does not operate.MAN (Manual): The pump can be activated manually by the user.

This control panel is designed to support a maximum current of 10 amperes (10A).

No, the RL044 control panel does not have an integrated fuse. It is mandatory to install an external fuse of the appropriate size to protect the circuit and the pump.

Before performing any installation or maintenance on the unit, it is crucial to disconnect the electrical power source of the system. This prevents injuries, damage to the environment and/or to the unit itself.

This product must be fitted with a fuse of the recommended size for the pump to which it is connected. Installing a properly sized fuse is essential to prevent damage in the event of a short circuit and to avoid pump malfunction, risk of injury, or fire.

Yes, the RL044 control panel is designed to work with automatic bilge pumps and can be activated by a float switch, thanks to its "AUTO" mode.

The RL044 control panel is designed with compact dimensions for easy integration into various marine dashboards. However, the specific dimensions (length x height) for the RL044 model are not provided in the technical documentation.

Yes, the RL044 control panel is an alternative to the RL042 model from the same brand, sharing similar voltage and current specifications (24V, 10A).

The RL044 is a control panel featuring a user interface with distinct control modes (AUTO/OFF/ON MAN). The DT154 and DT155 modules are bilge pump modules that include resettable thermal fuses for 10A or 15A currents respectively, focusing on circuit protection rather than direct control interface.

In "AUTO" mode, the RL044 control panel allows the bilge pump to start and stop automatically, typically in response to a float switch or water level sensor. This mode ensures continuous monitoring and pumping without manual intervention.

In "ON MAN" mode, the user can manually activate the bilge pump, regardless of any float switch or sensor. This allows direct control to empty the bilge on demand.

When the control panel is in the « OFF » position, the bilge pump is completely disabled. It will not operate automatically or manually, ensuring it remains off.

The RL044 control panel is designed for marine applications, particularly for managing bilge pumps aboard boats. Its design is suited for maritime conditions.

Yes, it is imperative to always disconnect the system's power supply before working on the control panel. This safety measure prevents personal injury, equipment damage, and fire hazards.

Installing a correctly sized fuse is critical to prevent damage to the product in the event of a short circuit. Failing to install the correct fuse may increase the risk of pump malfunction, which could lead to injury and/or fire hazards.

No, the RULE RL044 control panel is specifically designed for 24V electrical systems and must not be used with a 12V system. Using the wrong voltage could damage the device and/or the system.

The RL044 control panel is compatible with most standard bilge pumps, provided they operate at 24V and their current draw does not exceed 10A. It is always recommended to check your pump's specifications for optimal compatibility.

Yes, thanks to its compact dimensions, the RL044 control panel is designed to fit easily into various marine dashboards, providing a discreet and functional control solution.