Ampèremierz analogowy 0-100 A

This is a panel-mounted analog ammeter designed to measure direct current (DC) within a specific range.

This ammeter has a measurement range of 0 to 100 amperes.

A shunt is a precision resistor installed in series in the circuit whose current is to be measured. The ammeter measures the small voltage drop across this shunt, allowing it to display high currents accurately without the total current flowing through the device.

No, this ammeter is specifically designed to measure direct current (DC) only.

This ammeter is a product from the BEP brand.

Its primary function is to allow visual monitoring of the DC circuit current flow on the boat, such as battery charging, discharging, or equipment consumption.

The provided information does not specify whether this ammeter dial is backlit.

This ammeter is designed for panel mounting, meaning it is intended to be flush-mounted in a dashboard or control panel.

The shunt must be installed in series with the circuit whose current you want to measure. The ammeter is then connected to the shunt's sensing terminals, not directly to the main circuit.

Yes, since this is a panel-mount ammeter, a cutout hole will be required in the panel to accommodate the device body. The exact cutout dimensions should be specified in the product’s technical documentation.

The typical installation requires basic tools for electrical work and panel mounting, such as a drill, hole saws (for cutting the panel), screwdrivers, wire strippers, and crimping pliers.

As a DC ammeter measuring current via a shunt, the measurement itself is largely independent of the system voltage. It is compatible with common marine DC systems.

Yes, this ammeter is suitable for any type of boat or vehicle equipped with a DC electrical system that you wish to monitor, within its 0-100A measurement range.

Yes, the ammeter is designed to support up to 3 inputs. This means you can potentially connect additional shunts (not included with this product) to monitor different circuits using the same ammeter.

This ammeter operates as a standalone measurement unit. Although it is from the BEP brand, its compatibility with more complex or integrated BEP monitoring systems is not explicitly stated in the provided information.

Yes, as a product from the BEP brand, specialized in marine equipment, this ammeter is designed for use in a marine environment. However, the provided information does not specify its protection rating (IP).