Wyświetlacz 30/30HV do systemu H5000/Triton

The 30/30HV display is a high-performance mast-mounted instrument that provides:

A very high-contrast LCD display with H-Vision technology."Optically bonded" glass to prevent condensation and maximize clarity.
A single connection via NMEA 2000 network for power and data.
Very low power consumption.
Dual backlighting (red and white) for night vision.
Robust design with IP67 waterproof certification.

The 30/30HV display is specifically designed to integrate and operate with B&G H5000 and B&G Triton instrument systems.

Installation is simplified by a single connection. The display plugs directly into your boat’s NMEA 2000 network via a Micro-C connector. This single cable provides both 12V DC power and all navigation data transmission.

Yes, absolutely. It features a high-contrast LCD screen with an "optically bonded" treatment that eliminates reflections and condensation. The H-Vision technology and inverted "white on black" display ensure exceptional readability, even in intense sunlight.

The 30/30HV display is designed for maximum energy efficiency. Its power consumption is 0.5W in typical use and 1.0W at maximum, which is very low and ideal for sailboats.

This display is designed to withstand the harshest marine conditions. It is IP67 certified, meaning it is fully protected against dust and can be submerged in water up to 1 meter deep for 30 minutes.

The 30/30HV display has the following dimensions:

Width: 249 mmHeight: 156 mmDepth: 50 mmWeight: 1.2 kg

Yes, the 30/30HV display is equipped with a dual backlight system for perfect night visibility. You can choose between red lighting, which preserves night vision, and white lighting.

No, the 30/30HV display is not designed to be directly connected to a sensor. It must be connected to an existing NMEA 2000 network, which centralizes data from various sensors (wind, speed, depth, etc.) via an H5000 processor or a Triton system.

The display operates on a nominal 12V DC power supply. The accepted operating voltage range is from 10V to 16V DC.

You can configure and scroll through up to 14 customizable data pages. This lets you display the most relevant information for your sailing, such as wind angle, speed over ground, heading, etc.

Yes, you can install multiple 30/30HV displays on your NMEA 2000 network. This is a common setup on racing sailboats to simultaneously display different critical data on multiple displays at the mast base.

To ensure durability in a marine environment, the display is built with robust materials: the front panel is made of molded ABS and the rear housing is made of aluminum alloy.

For maximum readability even from a distance, the digits displayed on the 30/30HV screen are 63 mm high.

Yes, it is specifically designed as a mast-mounted instrument. Its robustness, IP67 waterproofing, and very high-visibility screen make it an ideal choice for mounting at the base of the mast, visible from the entire cockpit.

The 30/30HV display screen is designed to operate within a temperature range of -10°C to +55°C.

The display can show a wide variety of data from your H5000 or Triton system. The displayable data depends on the sensors connected to your network, but typically includes:

Wind angle and speed (true and apparent)Boat speed (Speed) and speed over ground (SOG)Course (Heading) and course over ground (COG)DepthVMG (Velocity Made Good) performance dataWaypoint information

The 30/30HV display uses the NMEA 2000 protocol with Micro-C connectors. To connect it to an older Simnet network, you would need a Simnet to Micro-C adapter cable, but full feature compatibility depends on the entire system.

Yes, the 30/30HV display is a display unit. It needs to be connected to an NMEA 2000 network managed by a processor, such as an H5000 CPU or the system of a Triton display, to receive and display sensor data.

To connect the display, you will need a Micro-C free T-connector (T-Joiner) on your NMEA 2000 backbone, as well as a Micro-C drop cable of the appropriate length to connect the display to this T-connector.

The 30/30HV display is a high-visibility mast display (HV for High Visibility) designed to be readable from the deck at a distance. It prioritizes legibility with 63 mm tall digits and a white-on-black inverted display. The Graphic Display H5000 is a richer graphical information display, typically installed at the chart table. The 30/30HV is optimized for robustness and visibility at the masthead, while the Graphic Display provides more detailed graphical functions for navigation.

Yes, the 30/30HV display is designed to integrate natively with H5000 and Triton instrument systems. It connects via the NMEA 2000 network, enabling seamless communication with both systems. Ensure your NMEA 2000 network is properly configured and terminated for optimal operation.

The data is displayed with figures 63 mm high. This large size, combined with the white-on-black inverted display and H-Vision technology, allows for instant reading from any point on the deck, even in full sunlight or low-light conditions.

The connection is made via a single NMEA 2000 port with a Micro-C connector. This cable provides both power supply and data transmission, significantly simplifying installation. Simply connect the display to your boat's NMEA 2000 bus using a Micro-C cable and a T-connector.

The 30/30HV display is designed for maximum energy efficiency. Its typical power consumption is 0.5 watts, with a maximum of 1.0 watt. On the NMEA 2000 bus, its consumption is approximately 0.6 watts (50 mA at 12 V), which equates to 1 LEN (Load Equivalency Number). It operates at a nominal 12 V DC, with a range of 10 to 16 V.

Yes, the 30/30HV display is IP67 certified. This standard ensures it is fully protected against dust and can be submerged in water up to 1 meter deep for 30 minutes. This makes it perfectly suitable for outdoor installation, including masthead or deck mounting, where it is exposed to spray and rain.

Yes, the 30/30HV display allows you to configure and scroll through up to 14 pages of customizable data. You can select the information to display on each page, such as true wind angle, course, speed over ground (COG/SOG), depth, or any other data available on your NMEA 2000 network.

The 30/30HV display is equipped with dual night lighting switchable between red and white. Red lighting preserves the crew's night vision, which is essential for night navigation. White lighting provides better readability when darkness is not a critical factor.

The 30/30HV display measures 249 x 156 x 50 mm (W x H x D). Its weight is approximately 1.2 kg. These compact dimensions and moderate weight make it suitable for masthead or deck mount installation.

The 30/30HV display can operate within a temperature range of -10°C to +55°C. This wide range ensures reliable performance in extreme weather conditions, whether in the tropics or in cold weather.

The 30/30HV display connects directly to the NMEA 2000 network. To integrate analog sensors (such as tank gauges or temperature sensors), you will need a B&G analog expansion module (sold separately) that connects to the network and converts analog signals into NMEA 2000 data.

The installation is designed to be simple thanks to the single NMEA 2000 connection. However, for a masthead installation, it is strongly recommended to use a qualified professional to ensure safety and waterproofing. The installation manual provided by B&G details the steps, including drilling and wiring. Ensure you follow the cable routing guidelines to avoid interference.

The H-Vision technology is an exclusive B&G display technology that provides exceptional contrast and maximum readability, even in full sunlight. It combines a high-contrast LCD screen with optical bonding that eliminates internal condensation and enhances clarity. Data is displayed in reverse white-on-black mode for instant reading.

The 30/30HV display is optimized for B&G H5000 and Triton systems. While it uses the NMEA 2000 protocol, which is a standard, its integration and advanced features (such as customizable pages and specific data display) are designed for these two systems. Its use with other brands may be limited and is not guaranteed.

The model number (SKU) for the 30/30HV display for the H5000/Triton system is 000-11089-001. This code allows precise identification when ordering or searching for technical documentation.

Yes, the 30/30HV display can be integrated into a network that includes multifunction displays (MFD) from the Zeus series. In this case, the Zeus typically acts as the navigation hub, while the 30/30HV serves as a masthead repeater display. Data is shared via the NMEA 2000 network.

If the screen does not power on, first check the power supply on the NMEA 2000 bus. Ensure the power cable is properly connected and the voltage is between 10 and 16 V. Also verify that the NMEA 2000 bus terminations are in place. Finally, inspect the Micro-C connector to confirm it is fully seated and free of corrosion.