Blok bezpiecznikowy wodoszczelny ST Blade z pokrywą

This fuse block is designed to provide water-resistant circuit protection for ATO/ATC-style fuses and Low Profile-style circuit breakers in a compact format, specifically suited for marine environments.

The ST Blade waterproof fuse block supports a maximum operating voltage of 32V DC.

This fuse block can handle a maximum current of 80A per block and 25A per circuit.

Yes, the fuse block is rated IP66 when mounted and its gasket is in place. This means it is protected against powerful water jets, making it ideal for marine environments.

No, model 5056100-BSS is fitted with a manual cover secured by yellow knurled screws that can be turned by hand. This provides quick, tool-free access to the fuses, meeting ABYC requirements.

The busbars and fuse clips are made of tinned copper C11000. This material ensures stable conductivity and excellent corrosion resistance, essential in a marine environment.

Yes, the fuse block is supplied with four writable labels to help you identify and organize your circuits.

Yes, the fuse block cover includes a practical storage space for spare fuses and fasteners.

The fuse block is mounted using through-holes that accept 1/4" (6mm) screws.

Load connections use 4 #8-32 screws with captive star lock washers. The main input uses a #10-32 stud.

The fuse block accepts a single input wire size 8 AWG to 4 AWG.

For the four load outputs, the fuse block accepts wires from 16 AWG to 10 AWG.

Integral plugs are provided to maintain the block's watertightness, even if fewer than four loads are used.

Yes, model 5056100-BSS, with its manual cover, complies with ABYC E-11.4.23, E-11.4.27, and E-11.9.1.2 requirements. These standards address tool-free accessibility and dashboard placement for safety.

Yes, this fuse block is CE marked, indicating its compliance with European standards.

This fuse block is compatible with ATO, ATC, and EasyID type blade fuses with fast-acting response. It also accepts ATO/ATC Low Profile style circuit breakers.

Yes, it can be stacked with the ST-Blade waterproof fuse blocks (models 5056 or 5056100) and the 100A waterproof busbars (models 2356 or 2356100) from the same range for modular installations.

The fuse block is designed to accept standard ring or fork terminals, making wiring easier with common tools.

Yes, it specifically accepts ATO/ATC Low Profile circuit breakers in addition to fuses.

Yes, thanks to its yellow knurled screw lid, it allows quick and tool-free access to the fuses. This feature complies with ABYC requirements for rapid access in an emergency.