Listwa zaciskowa 30 A - 6 obwodów

An electrical terminal block is a passive device used to distribute and organize electrical connections. The Blue Sea 2506-BSS model, with its 6 circuits, centralizes and secures the wiring of various onboard equipment, reducing the risk of short circuits and simplifying maintenance. It does not provide built-in protection (such as fuses) but offers reliable connection points.

The Blue Sea 2506-BSS terminal block is equipped with 6 separate circuits, allowing connection and power distribution to six different devices or groups of devices.

Each circuit of the Blue Sea 2506-BSS terminal block is designed to handle a maximum current of 30 amperes. Ensure the total amperage of all connected circuits does not exceed the terminal block’s overall capacity if specified.

The Blue Sea 2506-BSS terminal block has the following dimensions:

Length: 100 mm (3.94 in)Width: 33.8 mm (1.33 in)Height: 12.7 mm (0.50 in)

Yes, the Blue Sea 2506-BSS terminal block is specifically designed for marine applications. Blue Sea Systems products are recognized in the marine industry for their reliability and robustness in demanding environments.

The main difference is that the 2506-BSS terminal block provides electrical connection points without built-in protection. A fuse block, on the other hand, includes slots for fuses that protect circuits against overcurrent. With a terminal block, fuse protection must be provided upstream or downstream in the electrical system.

The 2506-BSS terminal block is ideal for organizing and distributing power to various low- to medium-power devices on board. This includes, but is not limited to, lighting circuits, bilge pumps, navigation instruments, or other auxiliary equipment.

No, the Blue Sea 2506-BSS terminal block is a passive electrical distribution component. It is designed to accept the appropriate cables and connectors for your installation, which must be purchased separately.

Yes, it is entirely possible to install multiple 2506-BSS terminal blocks side by side or in different areas of your installation to increase the total number of circuits available and better organize your wiring.

For mounting the terminal block, #10 (M5) mounting screws are required. The terminal block has holes designed for this type of hardware.

The Blue Sea 2506-BSS terminal block uses #8 (M4) screws to connect cables from different circuits.

For a secure and reliable connection, strip the end of each cable and use ring terminals or spade connectors suitable for #8 (M4) termination screws. Ensure the terminals match the cable diameter and are properly crimped.

Although the terminal block is designed for a marine environment, it is still recommended to install it in as dry and protected a location as possible to maximize its lifespan and avoid any premature corrosion of the connections. Avoid areas prone to direct splashing or immersion.

Yes, Blue Sea Systems terminal blocks are generally compatible with standard marine electrical systems, whether 12V or 24V DC. The 30A rating per circuit refers to the maximum current, not the system voltage.

Yes, you can connect cables of different cross-sections as long as the terminals used are suitable for the cable's cross-section and the #8 (M4) terminal screws. Ensure the cable cross-section is appropriate for the amperage of the circuit it powers.

The Blue Sea 2506-BSS terminal block is primarily designed for marine DC (direct current) systems. While it can technically handle AC (alternating current) within certain limits, it is advisable to use terminal blocks specifically designed and certified for AC applications for safety and compliance reasons.

Yes, the 2506-BSS terminal block is designed to integrate seamlessly with the Blue Sea Systems electrical product ecosystem, such as fuse blocks, busbars, and switches, facilitating the construction of a coherent and reliable electrical system.

Use eyelet terminals or fork terminals, insulated or non-insulated, sized for your cable cross-section and designed for #8 (M4) screws. Tinned copper terminals are recommended for marine environments to reduce corrosion.