Płytka bezpiecznikowa wodoszczelna WeatherDeck® 12 V DC - szara 6 obwodów

The BLUE SEA WeatherDeck® 4306-BSS waterproof fuse panel is designed to manage and protect 12V DC electrical circuits on board boats, particularly in exposed marine environments such as flybridges and open cockpits. It can power up to six different devices or systems, each protected by its own fuse.

This WeatherDeck® 4306-BSS waterproof fuse panel has six positions, meaning it can manage and protect up to six separate electrical circuits.

The WeatherDeck® 4306-BSS fuse panel is designed to operate with 12V DC (direct current) electrical systems.

The WeatherDeck® 4306-BSS fuse panel has a maximum capacity of 15A per circuit. The total cumulative capacity for the entire panel is 90A.

Yes, the front panel is rated IP67, meaning it is protected against immersion up to 1 meter for 30 minutes, provided it is correctly installed with its included sealing gasket.

The WeatherDeck® 4306-BSS fuse panel uses ATO®/ATC® type fuses. Each position is supplied with a pre-installed 15A fuse.

The circuit labels are backlit by bicolor LEDs that clearly indicate the status of each circuit:

Red: The circuit is off. Green: The circuit is on. No color: The fuse is blown.

The panel is made from UV-resistant thermoplastic and UL-V0 flame-retardant materials. The cover is in UV-resistant thermoplastic and the panel itself is in UL-V0 flame-retardant thermoplastic, ensuring durability against marine conditions.

Yes, the panel is supplied with a set of square-format labels, part number 4215, to customize the identification of each circuit.

The WeatherDeck® 12V DC 6-position fuse panel is gray.

The switches are equipped with built-in protections to minimize the risk of accidental circuit activations, ensuring greater safety and reliability aboard.

The panel dimensions (model 4306) are:

Width: 3.88 inches (98.55 mm)Height: 6.00 inches (152.40 mm)Depth: 2.50 inches (63.50 mm)

To install the WeatherDeck® 4306-BSS panel, a cutout of 3.000 inches (76.20 mm) in width and 4.125 inches (104.78 mm) in height is required. A cutting template is usually provided to facilitate this operation.

Yes, the WeatherDeck® 4306-BSS panel design allows installation in four different orientations, providing high flexibility for integration into various dashboard layouts.

Yes, to ensure the IP67 waterproofing of the front panel, it must be mounted correctly with the included gasket and securely screwed to the surface.

To connect the devices:

Connect a +12V DC source to the panel’s busbar.Connect the negative terminal -12V DC to the quick-connect terminal marked “Negative”.Connect the positive side of each device to a switch output terminal.Connect the negative side of each device to the DC negative.Ensure you use a wire gauge suitable for the cumulative panel capacity and include circuit protection for safe operation.

Yes, several precautions are essential:

Before starting the electrical installation, disconnect all AC and DC power sources.
Select a mounting location and panel orientation away from flammable areas.
The panel switches are not fireproof; the panel must NOT be installed in an explosive environment such as a gasoline engine compartment or a battery compartment.
If you are not familiar with electrical systems, consult a professional electrician.

To remove the cover, press the palm of your hand on the label area and pull on the edge of the cover. The front cover is designed to clip on and off, providing access to components and concealing mounting screws.

Yes, the circuit label backlighting is compatible with Blue Sea Systems digital dimmers, such as the DeckHand Dimmers (e.g., PN 7506). This allows independent control of lighting and dimming.

Yes, the WeatherDeck™ panel can be configured to power a 360° anchor light when the bow navigation lights are activated, while also allowing the anchor light to be activated independently. To do this, use the 0.25" quick-connect tab labeled « NAV Diode » on the circuit board at the rear of the panel, and follow the specific wiring diagram provided by Blue Sea Systems.