Woltomierz cyfrowy DC - 0 do 60 V DC

The BLUE SEA 8235-BSS digital DC voltmeter is designed specifically for precise and continuous monitoring of voltage in marine electrical systems. It focuses on reliable voltage measurement without additional functions.

This voltmeter has a measurement range of 0 to 60 V DC.

The measurement accuracy of the 8235-BSS voltmeter is ± 0.5 % (± 1 digit).

The display resolution for voltage is 0.01 V DC, allowing detailed reading of variations.

The display uses characters measuring 9/16 inches (approximately 14.3 mm).

No, the 8235-BSS model is a dedicated voltmeter. It does not include ammeter functions or programmable alarms, unlike other multifunction models from the brand.

Yes, it is useful for monitoring the state of charge of batteries. It is important to note that voltage is only a reliable indicator of state of charge when the open-circuit voltage of the battery is measured after stabilization (when the battery is neither charging nor discharging).

The maximum power consumption of the BLUE SEA 8235-BSS digital voltmeter is 1.00 W.

Yes, the display has adjustable brightness, allowing it to adapt to various lighting conditions for better visibility.

Yes, its printed circuit boards are coated to provide increased corrosion resistance, which is essential in a marine environment.

The voltmeter must be installed in a position that is visible and easily accessible for button operation. The location must be dry and protected, and it is recommended not to place it in direct sunlight for optimal display visibility.

Although its front panel is splash-proof and its printed circuit boards are coated for corrosion resistance, it is not intended for outdoor installation without additional protection or in very wet environments.

Installation requires basic electrical skills, particularly for high-capacity wiring and installing appropriate fuses. If you lack these skills, it is recommended to hire a qualified electrician.

The installation involves high-capacity connections as well as direct connections to the battery's positive terminal. These connections must be made carefully.

Yes, connections must be made carefully and protected with appropriate fuses, as shown in the wiring diagram provided with the product, for safety reasons.

The dimensions of the 8235-BSS voltmeter are as follows:

Height: 61.75 mm (2.431 in)Width: 73.56 mm (2.896 in)Depth: 86.36 mm (3.400 in)

The voltmeter is powered by a direct current voltage ranging from 8 to 50 V DC.

Yes, thanks to its 8 to 50 V DC power range, the voltmeter is compatible with 12 V and 24 V marine electrical systems, as well as other voltages within this range.

Yes, this voltmeter can be used with gel batteries. It is important to note that gel batteries may require up to 48 hours for their open-circuit voltage to stabilize completely, which is crucial for reliable state-of-charge readings.

It is specifically designed for marine DC electrical systems and is compatible with measurement voltages between 0 and 60 V DC, and power supply voltages between 8 and 50 V DC.