Wyłącznik akumulatora 500 A seria M włącz/wyłącz z kluczem blokującym

The BLUE SEA 6004B-BSS battery isolator from the M series is designed to isolate a single battery from a single load group. It allows cutting off the electrical power for safety, maintenance, or storage, and its locking key provides additional security.

This battery switch has the following current ratings:

Continuous current: 300A DC
Intermittent current (5 minutes): 500A DC
Starting current (30 seconds): 900A DC

Yes, the 6004B-BSS battery switch has an IP66 protection rating. This means it is fully protected against dust and powerful water jets, making it suitable for demanding marine environments.

The battery switch is equipped with 3/8" (M10) tinned copper terminals. Its one-piece design prevents loosening over time and ensures maximum conductivity as well as excellent corrosion resistance.

The BLUE SEA 6004B-BSS battery switch is designed to operate with a maximum voltage of 48 V DC.

The removable locking key on the BLUE SEA 6004B-BSS battery switch provides additional security. It acts as a service lockout device, preventing unauthorized or accidental use of the electrical system when the key is removed.

Before any installation, it is imperative to disconnect the battery's positive terminal. It is also recommended to consult a marine electrical professional to ensure proper installation and wiring.

To comply with the current specifications of the battery switch, it is recommended to use a 4/0 AWG cable (equivalent to 120 mm²) per terminal.

Battery cable terminals must be secured under the lock washer and nut with a torque of 13.56 N·m (120 lb-in).

The BLUE SEA 6004B-BSS battery switch offers multiple mounting options:

Surface mountingPanel front mounting (requires a Ø2-5/8" or 67mm hole)Panel rear mounting (requires a Ø2-5/16" or 59mm hole)

The battery switch is equipped with an insulating cover featuring three detachable side pieces. This allows easy access to the cables and the ability to route the wiring in any direction.

No, it is critical never to set the battery switch to the OFF position while the engine is running. This could damage the alternator or other components of the electrical system.

Yes, it is recommended to turn off all electrical devices before switching the battery switch to the OFF position to avoid any voltage spike or potential damage to the equipment.

Yes, the BLUE SEA 6004B-BSS battery switch meets all American Boat and Yacht Council (ABYC) requirements for battery switches.

Yes, this battery switch is protected against external ignition, in accordance with UL 1500 and SAE J1171 standards. It is also UL 1107 listed for electrical power switches.

No, the 6004B-BSS model from the M series is specifically designed to switch a single battery to a single load group. For managing multiple battery banks or combining them, other BLUE SEA battery switch models would be required, such as the E or HD series.

Yes, with a 300 amp DC current capacity, this battery switch is suitable for outboard motors and small gasoline or diesel engines.

The stud length is 7/8" (22 mm), allowing multiple cable terminals to be fitted.

Yes, the country of origin for this product is the United States.