Kabel SCI 2 m do przycisków RJ45

The CZone SCI 2m cable is designed to provide reliable interconnection between CZone Smart Control Interfaces (SCI) or Digital Switch Breakout (DSB) units and PowerBars (PB), as well as compatible push buttons. It simplifies the implementation of the control interface for marine electrical systems.

This CZone SCI cable is 2 meters long.

Yes, this cable is specifically designed for demanding marine environments. Its durable construction ensures reliable long-term performance in these conditions.

The product reference (SKU) for this CZone SCI 2m cable is 80-911-0087-01.

This cable is primarily a data and signaling cable, ensuring efficient and secure transmission of control information between the various components of the CZone system.

The cable is built with a durable construction, suited for demanding marine environments, to ensure long-term performance and reliability.

The CZone SCI 2m cable is typically sold separately. Any additional mounting or connection accessories for CZone systems must be purchased separately if required.

Yes, the 2-meter length and cable design provide installation flexibility, allowing structured and orderly routing of wiring within CZone electrical systems.

This cable is a CZone product.

This cable is compatible with CZone digital switching systems, specifically for Smart Control Interfaces (SCI), Digital Switch Breakout (DSB) units, and PowerBars (PB).

The CZone SCI 2m cable has an RJ45 connector at one end and either a 5-pin connection or a PowerBar (PB) switch socket at the other.

Yes, this cable is designed to fit RJ45-compatible pushbuttons. It integrates directly into the CZone network for pushbutton applications, including those compatible with Carling devices.

Yes, this cable is specifically designed for interconnection with CZone Smart Control Interfaces (SCI).

Yes, the CZone SCI 2m cable is compatible with CZone Digital Switch Breakout (DSB) units to ensure the required connectivity.

Yes, this cable is compatible with PowerBars (PB) CZone, allowing reliable connection for electrical system control.

This cable is designed specifically for the CZone ecosystem and its components. While it uses a standard RJ45 connector on one end, the other end is a 5-pin connection or a PowerBar (PB) switch socket, making it primarily compatible with CZone devices and Carling-compatible units integrated into the CZone network.

Route the cable in a structured and orderly manner, avoiding heat sources, sharp edges, and areas of high abrasion. Ensure the cable is not subjected to excessive tension or tight bends.

The cable itself is a passive component and does not require direct software configuration. However, the CZone systems it is connected to (SCI interfaces, DSB, PowerBars) require software configuration via the CZone interface to function properly and control the digital functions onboard.

The connection is made by plugging the RJ45 connector into the compatible RJ45 interface or pushbutton, and the other end (5-pin connection or PowerBar switch port) into the appropriate CZone modules such as PowerBars (PB) or SCI/DSB interfaces. Connections are typically plug-and-play for simplified installation.

It is strongly discouraged to cut or modify the length of this cable. Data cables like this one are manufactured with precise lengths and optimized terminations to ensure signal integrity and reliable communication within the CZone network. Any modification could compromise its performance.