ECLIPSE SL100, Strip Light, Blue, 2.5m - Garmin image 1

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 7%

Garmin

010-04478-00

ECLIPSE SL100, niebieska taśma LED, 2,5 m

Conçue pour l'éclairage décoratif et indirect, la bande lumineuse Garmin ECLIPSE SL100 bleue de 2,5 mètres est une solution flexible et étanche (IP68) pour tout bateau 12V DC. Résistante aux UV et entièrement encapsulée, elle s'installe facilement en intérieur comme en extérieur. Les clips de fixation à visser sont inclus pour une installation sécurisée.

Prix publicBénéficier du tarif pro

73,88€

73,88€ ~~79,99€~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ produktu	Bande lumineuse
Napięcie pracy	12
Typowe zużycie energii	12.5
Kolor światła	Bleu
Stopień ochrony IP	IP68
Kompatybilny z ściemniaczem	Oui
Długość taśmy	2.5
Gęstość diod LED na metr	60.0
Tylna strona samoprzylepna	Oui
Bend Axis	Vertical
Current Consumption Per Meter	0.41
Minimalny promień gięcia	50
Zakres napięcia pracy	10-15
Zużycie energii na metr	5
Typ zasilania	DC
Recommended Installation Environment	Intérieur et extérieur (zones humides)
Strip Thickness	5.2
Strip Width	12.0
Odporność na UV	Oui

Description détaillée

Niebieska taśma LED ECLIPSE SL100 firmy Garmin o długości 2,5 m (referencja 010-04478-00) to elastyczne rozwiązanie oświetleniowe do montażu w miejscach wymagających dyskretnego oświetlenia. Zapewnia dekoracyjne i pośrednie oświetlenie, idealne do obramowań burt, pod meblami lub za panelami sufitowymi. Ten model jednokolorowy (niebieski) różni się od wersji dwukolorowych (niebiesko-białych) lub RGB z serii ECLIPSE, które wymagają użycia ECLIPSE Command Center do pełnej kontroli kolorów i efektów świetlnych. Taśma ECLIPSE SL100 w kolorze niebieskim przeznaczona jest do zastosowań, w których potrzebne jest proste i skuteczne oświetlenie akcentujące.

Budowa i specyfikacja techniczna

Wyprodukowana z materiałów odpornych na promieniowanie UV i całkowicie zalanych żywicą, taśma LED ECLIPSE SL100 nadaje się do zastosowań w środowiskach morskich – zarówno wewnątrz, jak i na zewnątrz. Klasa szczelności IP68 gwarantuje ochronę przed pyłem oraz tymczasowym zanurzeniem, jednak nie jest przeznaczona do ciągłego zanurzenia w wodzie. Zintegrowano w niej 60 diod LED na metr, a zasilanie odbywa się wyłącznie z systemów 12V DC w zakresie napięcia 10–15V DC. Typowe zużycie mocy wynosi 5 W na metr, co przy napięciu 12V odpowiada poborowi prądu 0,41 A na metr. Dostępne są również inne długości w tej samej serii: 1 m i 5 m, aby dostosować się do różnych potrzeb instalacyjnych.

Montaż i elastyczność

Taśma o wymiarach 10,8 mm wysokości i 5,2 mm grubości charakteryzuje się minimalnym promieniem gięcia 50 mm w osi pionowej, co uniemożliwia jej skręcanie lub zginanie w osi poziomej. Można ją przycinać do wymaganej długości, a końcówki należy zabezpieczyć za pomocą dostarczonego silikonu. Montaż odbywa się za pomocą dostarczonych taśm samoprzylepnych 3M i/lub klipsów mocujących, zalecanych szczególnie w przypadku instalacji zewnętrznych lub w miejscach narażonych na wilgoć. Taśma LED ECLIPSE SL100 może być sterowana za pomocą prostego włącznika/wyłącznika, włącznika chwilowego, kompatybilnego ekranu wielofunkcyjnego lub urządzenia inteligentnego.

Documentations

Type	Nom
	Notice d'installation - Guide d'installation de la bande lumineuse Garmin Eclipse SL100 (EN)

Avis de l'expert

« Marine lighting ECLIPSE SL100: Simplified integration and reliability »

The Garmin ECLIPSE SL100 light strip is a supplemental lighting solution that stands out for its ability to blend discreetly into deck or cabin layouts. Its flexible design, with a minimum vertical bend radius of 50 mm, allows it to follow the boat's contours, providing efficient indirect lighting without being intrusive. Unlike the two-color or RGB versions in the ECLIPSE range, this single-color blue model does not require the integration of an ECLIPSE Command Center, simplifying wiring and installation for more basic setups. This simplicity is a key advantage for owners seeking a "plug-and-play" solution for accent lighting.

The most critical aspect of installation is the cutting and sealing of the ends. It is essential to follow the instructions meticulously to maintain the IP68 rating of the strip, particularly the application of the supplied silicone. For enhanced durability in outdoor areas or zones subject to vibrations, using the screw-in mounting clips in addition to the adhesive is highly recommended. This ensures reliable mechanical retention against the constraints of the marine environment. This type of strip is particularly suitable for mid-sized boats where an aesthetic touch is desired without excessive system complexity. Note that, while IP68-rated, it is not designed for permanent submersion, limiting its use to deck areas or interior spaces protected from prolonged immersion.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

ECLIPSE SL100, niebieska taśma LED, 2,5 m

73,88€

73,88€ ~~79,99€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the color of this ECLIPSE SL100 LED strip?

This Garmin ECLIPSE SL100 light strip is blue. It provides simple and effective accent lighting.

What is the length of the ECLIPSE SL100 light strip?

The ECLIPSE SL100 light strip has a length of 2.5 meters.

Is this LED strip suitable for outdoor use on a boat?

Yes, the ECLIPSE SL100 LED strip is made from UV-resistant materials and is fully encapsulated, making it suitable for indoor and outdoor marine environments. However, it must not be installed in areas of direct strong sunlight.

What is the IP rating of the ECLIPSE SL100 LED strip?

The ECLIPSE SL100 LED light strip has an IP68 rating. This ensures protection against dust and temporary immersion, but it is not designed for permanent submersion in water.

Can the light strip be cut to fit a specific length?

Yes, the light strip can be cut at the marked cutting points. It is essential to seal the cut end with the supplied silicone adhesive to maintain the product's waterproofing.

How to install the ECLIPSE SL100 LED strip?

Installation takes place in several steps:

Clean the mounting surface thoroughly with IPA.Peel off the 3M adhesive backing and press the strip firmly into place, applying pressure only to the edges (not the LEDs).For outdoor installations, wet areas, or tight radii, mechanical fasteners (mounting clips) are recommended in addition to the adhesive.Allow the adhesive to cure for 24 hours before powering on the light strip.

Is additional mounting required for outdoor installation or in wet areas?

Yes, for installations outdoors, in wet areas or with tight bend radii, it is recommended to use mechanical fasteners (mounting clips) in addition to the adhesive layer. These fasteners should be spaced 250 to 300 mm apart.

What is the minimum curvature the LED strip can withstand?

The ECLIPSE SL100 light strip has a minimum bending radius of 50 mm (1.968 inches) on the vertical axis only. It must not be bent on the horizontal axis or twisted.

What precautions should be taken when handling or installing the LED light strip?

During handling and installation, it is important to:

Do not let the strip fall or twist.Do not apply pressure on the LED area, only on the edge of the strip.Do not pull, stretch, twist or bend the strip on the horizontal axis.Always use two people to install lengths over 1 meter.Unroll the strip flat in a straight line and do not allow it to bend, twist or bunch up.

What type of surface is recommended for installing the adhesive tape?

The mounting surface must be perfectly clean, free of dust and dirt. It is recommended to clean it thoroughly with isopropyl alcohol (IPA) before applying the 3M adhesive tape.

What is the required supply voltage for this LED strip?

The ECLIPSE SL100 light strip is designed to operate exclusively on 12V DC boat systems. It can operate within a voltage range of 10 to 15V DC. Never connect it to voltages outside this range or directly to AC power.

Can I connect this LED strip to a 24V electrical system?

No, this LED strip is designed to operate only with 12V DC boat systems. Connecting it to a 24V system could damage it.

Does this single-color LED strip require an ECLIPSE Command Center?

No, this single-color blue version of the ECLIPSE SL100 light strip does not require an ECLIPSE Command Center to operate. It can be wired directly to a power switch. However, it can be connected to a Command Center if desired, following the specific wiring diagrams.

How many LEDs are there per meter on this LED strip?

The ECLIPSE SL100 light strip integrates 60 LEDs per meter, providing uniform and efficient lighting.

What is the power consumption of the ECLIPSE SL100 LED light strip?

The typical power consumption of the ECLIPSE SL100 LED light strip is 5 watts per meter. This corresponds to a current draw of 0.41 amperes at 12V per meter.

Is this LED light strip UV-resistant?

Yes, the ECLIPSE SL100 LED light strip is made from UV-resistant materials. However, it is recommended not to install it in areas exposed to strong and prolonged direct sunlight.

What should I do after cutting the light strip to the correct length?

After cutting the light strip, it is crucial to seal the cut end. Peel back 20 mm of the adhesive backing, mark and remove the adhesive tape to expose the silicone, then fill the end cap halfway with the supplied silicone adhesive and secure it. Allow to cure for 24 hours before handling.

Is it necessary to hire a professional to install this LED strip?

It is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the ECLIPSE SL100 LED strip to ensure correct and safe installation.

Can I mix single-color and RGB LED strips in the same zone on an ECLIPSE Command Center?

No, single-color, dual-color, and RGB LED strips must not be connected to the same zone output of an ECLIPSE Command Center. Each type of LED strip requires a dedicated zone output.

What is the main purpose of the ECLIPSE SL100 LED light bar?

The ECLIPSE SL100 LED strip is designed to provide decorative and indirect lighting. It is ideal for creating ambiance on the gunwales, under furniture, or behind ceiling panels on your boat.