LUX, reflektor flood 18 cali (45,7 cm)

The Garmin LUX Flood Light 18" spotlight is a marine-grade lighting fixture designed for high-intensity illumination. It provides a CRGBW color output (cool white, red, green, blue, warm white) with an intensity of 7,500 lumens. It features 5-channel LEDs allowing color flexibility and adjustable white temperatures ranging from 2700 K to 6500 K. Its beam is ultra-wide and oval-shaped, covering 70° to 90° for uniform light diffusion.

The LUX Flood Light 18" spotlight has a luminous intensity of 7,500 lumens. It is equipped with 5-channel LEDs (warm white, cool white, red, green, blue) that allow adjustment of the white color temperature from 2700 K to 6500 K.

The Garmin LUX Flood Light 18" spotlight measures 186 mm (7.32 inches).

The LUX Flood Light 18" spotlight operates on a voltage range of 10 to 31 VDC. Its maximum current draw is 9.2 A at 12 V and 4.6 A at 24 V, with an average power consumption of 110 W.

The LUX Flood Light 18" spotlight produces an ultra-wide oval beam of 70° to 90°. This design ensures uniform coverage and homogeneous color diffusion, avoiding shadowed areas.

Installation, inspection, and maintenance of this product must be carried out exclusively by a qualified electrician, in compliance with all applicable electrical codes. It is imperative to disconnect the power supply before and during installation and maintenance.

The mounting location must be flat and sturdy.

For the mounting bracket fixing holes, you must drill 6.5 mm holes, suitable for an M6 bolt (supplied). For cable routing, a 7 mm (0.275 inch) hole is required.

The cable entry must be made watertight. Using a stuffing box is recommended to ensure watertightness and keep the cable in a fixed position, without movement or rotation.

When securing the spotlight to the brackets using the M6 bolts, washers, and nylon nuts provided, the recommended tightening torque is 5 Nm. Do not overtighten. The nylon washers must be placed inside the stainless steel bracket.

The Lumishore LUX Flood Light 18" spotlight requires connection to the Lumishore LUX Light module. For complete usage instructions, refer to the LUX Light control module installation manual (reference 45-0145).

A maximum of 16 LUX Flood Light projectors can be connected to a single Lumishore LUX Light module.

The yellow wire (Data) must be connected in series (daisy chain) to each projector.

Yes, each spotlight requires its own connection to a power source. Additionally, each lighting circuit must be protected by an appropriate fuse.

Lumishore Ltd guarantees its lighting systems, including the LUX Flood Light 18" spotlight, against manufacturing defects for a period of three years from the initial date of purchase.

The warranty may be voided in case of misuse, abuse, incorrect installation, negligence, inadequate shipping, damage caused by disasters (e.g., fire, flood, storm, and lightning), installation by unqualified personnel, unauthorized repair or modification, or unapproved installations. Failure to comply with installation guidelines, maintenance, and usage instructions in the documentation also voids the warranty.

To clean the spotlight, use only water and soap with a soft cloth. Do NOT use any chemical cleaners and do NOT clean with a pressure washer. Regular inspection of the fixture must be performed.

Yes, this luminaire has been photobiologically tested and classified as risk group 2 (moderate). It is not recommended to fix the lamp while in operation, as it may emit optical radiation that could be potentially hazardous to the eyes.

The CRGBW acronym means the spotlight provides a colour output combining cool white (Cool White), red (Red), green (Green), blue (Blue) and warm white (Warm White). This allows a wide range of colours and white temperatures.

The spotlight comes with M6 bolts and nylon-insert nuts for mounting the brackets. Additional M6 bolts, washers, and nylon-insert nuts are included for attaching the spotlight to the brackets.