LUX SL180, pasek świetlny, CRGBW, 500 mm

The GARMIN LUX SL180 LED light strip is a 500 mm long marine lighting solution offering a full CRGBW color spectrum (cold white, red, green, blue, warm white). It is designed for above-water installations, both indoors and outdoors, and allows white light adjustment from 2700K to 6500K.

The LUX SL180 provides CRGBW lighting, meaning it can produce cool white, red, green, blue, and warm white. It also allows adjusting the white color temperature from 2700K (warm white) to 6500K (cool white) to create the desired onboard ambiance.

The GARMIN LUX SL180 light bar has a length of 500 mm.

Yes, the LUX SL180 LED strip is fully encapsulated and has IP68 protection. This means it is protected against dust and temporary immersion in water. It can be installed in damp areas but is not designed for permanent submersion.

The LUX SL180 LED light strip is designed to operate exclusively with Lumishore LUX LED strip driver modules. It is critical not to connect it to any other third-party lighting products or drivers, as this may void the warranty and prevent proper operation.

There are several ways to install mechanically:

3M adhesive: Clean the surface thoroughly, remove the adhesive backing, and press firmly along the edges of the strip. Allow the adhesive to cure for 24 hours before turning on the light.Mechanical fasteners: For outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners in addition to adhesive. These clips should be spaced 25 to 30 cm apart or placed on either side of a bend.Optional mounting clips: Stainless steel metal clips may be provided for narrow mounting channels. They are secured with a countersunk screw.It is always recommended that a qualified professional performs the electrical and mechanical installation.

The LUX SL180 light strip is designed for installations above water, indoors or outdoors. It can be installed in damp areas but must not be permanently submerged. Although it is made from UV-resistant material, it is advisable not to install it in areas exposed to strong direct sunlight.

Yes, the LUX SL180 LED strip is made from UV-resistant material. It has also been tested for salt spray resistance, ensuring durability in harsh marine environments.

Yes, the LED strip can be bent, but only along the vertical axis, with a minimum bending radius of 50 mm. It is critical not to bend it along the horizontal axis or twist it, as this could cause irreversible damage.

Yes, the LUX SL180 LED strip is dimmable as standard, allowing precise control of light intensity to match the desired ambiance.

The LUX SL180 LED light strip is equipped with 60 CRGBW LEDs per meter.

The LUX SL180 light strip has a slim 14.5 mm profile, making it easy to discreetly integrate under coamings, furniture, or behind panels.

The standard warranty for Lumishore lighting systems (now part of Garmin) is three years from the original purchase date, covering manufacturing defects.

Yes, a qualified professional should always perform the electrical and mechanical installation of the LED strip to ensure correct and safe installation, and to maintain warranty validity.

Yes, for outdoor installations in humid areas or when tight bend radii are required, it is strongly recommended to use mechanical fasteners in addition to 3M adhesive tape to ensure a durable and secure attachment.

Yes, the LUX SL180 LED strip provides adjustable white light from 2700K (warm white) to 6500K (cool white), allowing precise adjustment of the onboard lighting ambiance.